Filter
Top Products
GB 21
FIRST TIME INSTALLATION
Predefined channel
Select the predefined channel that will give the best Signal qual-
ity (SNR) bar indication. Within a few seconds you will get picture
from the channel in the background.
Adjust motor
• If necessary, fine tune the motor with the buttons on the
remote control.
As you now have a picture in the background, it is time to per-
form a Channel search procedure.
• Press OK......
....and you will get the Channel search menu.
The most common is to start from the “Automatic search” line.
(You can always make a Manual or Advanced Search later on.)
• On the line Automatic Search select the satellite from which
you want to search for channels, for example Astra.
• Press OK......
Adjust motor for Astra/Hotbird
To continue the installation you now have to determine
the angle to Astra 1/Hotbird. The motor and the antenna
must be adjusted towards the Astra 1 satellites on 19.2°
East (Hotbird satellites on 13° East) as this is the refer-
ence setting. All other preprogrammed satellite positions
are oriented relative to Astra 1/Hotbird.
You also have to mount the antenna at a proper place
outdoors.
How to do all this, please read the separate fitting in-
structions for the SatScan or DiSEqC positioner.
.......and you get the antenna adustment menu
• If necessary, adjust the motor until the Signal strength (AGC)
and the Signal quality (SNR) are optimal. Please note, that this
will only affect the present satellite position.