Filter
Top Products
GB 33
MAIN MENU
System configuration
You will be asked to enter your access code before you can en-
ter this menu. The code is preset to 1234 from the factory.
(The code can be changed from the Parental control menu. Re-
fer to page 40.)
If you want to customize the system to suit you better, you can
specify some settings from the submenus in the “System con-
figuration” menu.
Please note that many of these functions are the same as in the
“First time installation.”
Channel search
The Channel search procedure can be performed in different
ways.
• If there are predefined channels, you can make an Automatic,
Manual or Advanced search.
• If no predefined channel is available you can make a Manual
or Advanced search.
Automatic search
Start an Automatic search on a selected satellite by pressing OK.