Filter
Top Products
GB 10
Connecting an Analogue Satellite Receiver and VCR
Nokia Smart Priority Switch
Analogue receiver
Mediamaster
Connecting a HiFi System
• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA
input sockets on your HiFi system.
• If available you can connect an RCA/Cinch single cable from
the DIGITAL AUDIO socket on the Mediamaster to your HiFi
or Dolby Pro Logic system.
Note: To avoid interference you must use a screened audio
cable.
Analogue receiver
Mediamaster
With Universal Twin LNB
VCR
SCART
RF
VCR
SCART
RF
SCART
• Connect a SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
• Connect a SCART lead between the VCR and the AUX SCART
socket on the Mediamaster.
• Connect an RF lead from the RF output on the
VCR to the TV aerial input on the TV.
• Connect an RF lead from the RF output on the
Analogue receiver to the RF input socket on the
VCR.
• Connect the TV aerial to the RF input socket on the Analogue
receiver.
In order to switch the signal from the dish between the ana-
logue and digital receivers, you need a Nokia Smart priority
switch (at A B in the diagram) or a Universal Twin LNB.
Nokia Smart priority switch
• Connect a coaxial cable between output A on the NOKIA Smart
priority switch (accessory) to the LNB socket on the analogue
receiver.
• Connect a coaxial cable between output B on the NOKIA
Smart priority switch (accessory) to the ANTENNA socket
on the Mediamaster.
The analogue receiver must be switched to OFF (standby)
when you want to watch digital satellite channels from
the Mediamaster.
Universal Twin LNB
If you have a Universal Twin LNB you connect:
• Cable A between output A on the LNB to the
LNB socket on the analogue receiver.
• Cable B between output B on the LNB to the
ANTENNA socket on the the Mediamaster.
Both the VCR and the analogue satellite receiver must be
tuned to different UHF channels than the Mediamaster when
using RF-connectors.
With Nokia Smart
Priority Switch