Nokia 9860 S DVR User Manual


 
GB 34
MAIN MENU
Parental Control
To open this menu you will be asked to enter your access code.
From the factory the access code is set to 1234.
The following settings can be altered from this menu.
Receiver lock
If you select On, you will have to enter the access code every
time you start the Mediamaster from stand-by.
Age Rating Control
If you want everybody to have access to all available types of pro-
grammes, select Off.
If you select On, you may block programmes unsuitable for
children. Select an age limit between 4 and 18 years on the line
that appears.
However, you should be aware that not all Service Providers have
the necessary codes for these functions implemented in their
transmissions.
Do not use this Age Rating Control function if you are using the
Age Rating Control provided with your Smartcard. See page 34.
Change access code
From here you can change the access code from the stand-
ard 1234. DO NOT FORGET IT! Without it you do not have ac-
cess to any of the functions where the code is required!
If you forget it, you have to contact an Authorized Nokia
Service Center to get help.
Appearance Preferences
Banner time-out
When you switch channels, an information banner will be shown
for a few seconds. You can select for how long the banner will
be shown.
Volume bar
Select whether or not you want the volume bar to appear on the
screen when you change the volume.
Volume bar time-out
Select how long the banner will be visible on the screen.
Subtitles
Select whether or not subtitles will be visible on the screen.
Picture format
If you have a TV set with the 4:3 picture format and the transmis-
sion is in 16:9, you can select Fullscreen or Letterbox.
Fullscreen will fill up the screen but cut off some information on
the left and right sides.
Letterbox will give a complete picture, but leave black areas at
the top and bottom.
letterbox format
fullscreen format