Filter
Top Products
GB 32
MAIN MENU
TV Settings
From here you can adjust settings concerning your TV.
TV screen format
Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
TV signal
If the teletext function does not work when watching channels
from an analogue satellite receiver connected to the Media-
master, change this setting from RGB to PAL.
RF channel
Select this alternative if you have to change the RF channel.
If you change the RF channel number, you must also change it
to the same value on the TV. If you do not, the picture will become
black.
RF modulator type
If the Mediamaster is connected to the TV by an RF lead, you can
select the RF modulator type. The RF Modulator affects a chan-
nel’s audio. If you get picture but no sound, the RF modulator se-
lection might be wrong.
Select UK (PAL I) if the Mediamaster is used in the UK.
Select Normal if it is used elsewhere.
The RF channel number will be in-
dicated on the front display of the
Mediamaster.
Position of the RGB output
Adjust the horizontal position of the TV picture with the but-
tons. (The “TV signal,” see above, must be set to RGB for this
function to work.)
Time Adjustment
The time is adjusted by using the buttons, ±1/2 an hour at a
time.
You can also adjust the minutes by using the buttons.