Filter
Top Products
GB 19
VIEWING MODE
General Information
The following describes the basic functions of your Mediamaster
while watching satellite TV or listening to satellite radio.
Some of the functions described here are dependent on the
Service Provider and can only be used if they are included in
the transmitted programme information.
Please note, that during the Channel Search procedure, the
Mediamaster may download a large number of channels. This
may include channels from various Service Providers, also those
to which you do not have access unless you have a Smartcard
from one of those Service Providers.
If you select a programme to which you do not have access, you
will get a message on the screen. This message may vary, de-
pending on Service Provider and used Smartcard/CA Module.
While viewing, the current channel number will be shown on the
front panel display.
In addition to the normal functions like switching the Media-
master in/out of stand-by, changing the volume etc. (ref. to the
overview of the remote control) there are some other useful func-
tions which will be explained in this part of the manual.
Programme Information
Every time you change channels you will receive programme in-
formation for a few seconds. (In the “User Preferences” menu
you can select how long this information will be shown.)
The information may include:
Current time.
Channel list.
Channel number and name.
Name of the current and next programme.
The start and total time of the current programme.
A bar, indicating the elapsed time of the current programme.
Recommended lowest age limit for watching the programme.
The start and total time of the next programme.
Programme information will only be available if it is included in
the transmission. Otherwise a “No information available” mes-
sage will be shown.
You may change channel lists with the
buttons.
Information about
the next programme
Information about
the current pro-
gramme
Channel number
and name
Current
time
Channel
list
Age limit
information
12