Filter
Top Products
－２３－
5. INSTALLATION
5.2 Chart Paper Loading (RD2800)
1 Chart Paper Cassette Removal
1) Open the door.
2) Remove the chart paper cassette.
(1) Pull the grip of the chart paper cassette and
take the chart paper cassette slightly out of
the internal unit. (Pens lift up.)
(2) Pull the grip slowly to take the chart paper
cassette out of the internal unit completely.
The sharp corners of the rear stripper plate
help to feed the chart paper smoothly. Be
careful not to cut your fingers when loading
or replacing the chart paper.
Don’t remove the chart paper cassette
during printing by a plotter pen. The
cassette may hit 1st pen during the
automatic pen lift-up function executed.
2 Chart Paper Loading
1) Open the chart paper holders.
Open the chart paper guide and the stripper
plate.
2) Prepare a chart paper.
Shuffle both end of the chart paper to prevent
two or more chart papers fed being together.
3) Put it into the chart paper housing.
The shapes of the sprocket holes on the right and
left sides are different. The right side holes are an
elliptical shape.
Don’t remove the chart paper
cassette during printing.
Grip
Chart paper cassette
Guide rail
Guide
Chart
paper
guide
Stripper plate
Open from
here.
Caution
S
p
rocket holes
(
circular
)
Printing side (Caution in red)
Sprocket holes
(elliptical)
Drum
Chart paper
housing
Caution
Be careful with the corners
of the rear stripper plate
Caution