Filter
Top Products
－７４－
11. OTHER PROGRAMMING
11.10 Message
2 Programming Flow Chart
<Example> From “none” to “MOTOR ON”.
Operation screen
[Check]
( ＋ ）
3 sec. or more
[To be ready for programming]
[Programming No.]
,
Temporarily stored
Programming other Nos.?
＋
Stored
(1) Select the channel to be “none” with
or .*
(2) Press and
simultaneously to clear and perform
[temporarily stored] and then [stored].
* If the channel is programmed by a
numeric value and cleared, the
engineering unit of channel before
programming change is programmed
to be “none”.
Message characters are displayed
only for the programmed channels.
(Digit Nos. appear.).
• Press or to change
channels.
• The digit displaying a tag character
(digit No. with decimal point) shifts
with or .
• Numeric value (0 to 9):
to , and
• Alphabetical characters (A to Z):
Press and
simultaneously and select a character
by pressing or .
• Special characters (%, /, °C, °F)
% ( + )
/ ( + )
°C ( + )*
°F ( + )*
*A space corresponding to 2 digits is used.
• (space): A space is treated as
a character.
Store the [temporarily stored]
parameters into the memory. (A
programming change mark is printed.)
No.
Cursor
YES
NO
No.
Message
character
DI
SP
6
A～Z
SET
END
1
CHART
°
F
ENTRY
SHIFT
SET
END
0
CLEAR
Storing
Reference 3
%
/
SHIFT
0
CLEAR
To check all programmed digits
Reference 1
To program message to “none”
Remarks
Programmable characters
and key operation
Reference 2
Ref. 1
Ref. 2
Ref. 3
Remarks
Vari ou s
keys
%
/
°
C
°
F
SHIFT
SHIFT
SHIFT
SHIFT
0
CLEAR
9
LIST
－
(
-
)
SHIFT
6
A
～
Z
%
/
%
/
°C
°
F
SPACE
COPY(=)