Filter
Top Products
－９４－
14. PRINTING FORMAT
14.2 Programming Compressed/Expanded Printing
This programming display only appears for the
printing format (option). This programming is to
print the specified range in the
[compressed/expanded] printing mode.
1 Compressed/Expanded printing
A specified range in the trace printing range
can be printed in the compressed or
expanded printing mode.
(1) This programming can be executed for
each channel.
(2) The printing range can be programmed
optionally irrespective of the programmed
range in the [Range/Printing range].
(3) Up to 2 break points can be programmed.
2 Programming Mode
1) Screen 1 (Printing format check)
Dots appear at the selected format.
By pressing , the dots disappear and the
cursor appears instead.
2) Screen 2 (Programming channel)
By selecting compressed/expanded (
), the
cursor appears at the channel programming
position.
3) Screen 3 (Programming break point printing
position)
(1) Program each break point printing position (%) in
the range of 10 to 90.
(2) When all programming are completed, return to
the above display and execute [Storing].
(Note) No.1 break point should be lower than No.2
break point. When no programming for the
No.2 break point is required, leave it as
spaces.
4) Screen 4 (Scale programming of each
printing position)
(1) When programming a scale, the printing position
advances to the next position. Program scales
up to the 100% position.
(2) After completing the programming for 100%,
press to return to Screen 3.
Standard
Automatic
range shift
Zone
Compressed/expanded
Printing position (%)
<Example> Compressed and expanded programming
<Range No. 23 (K thermocouple)>
Scal
e
Printing
position
Printing rang
e
-100
600
800 1200
-200
1370
Measuring value
(1) (1)
C
om-pre
ssed
Expanded
20%
(No. 1 break point)
0%
100%
-
100
600 800
1200
(2)
(3)
(4)
(5)
Programming No. 1
break point
Programming No. 2
break point (Note)
Mark is the programming point and No. (1) to (5) shows the
order of programming. By pressing after the
programming ends, the next programming screen appears.
(Program No.1 break point and No.2 break point by 2 digits.
<Example> 5% →05)
ENTRY
SET
END
ENTRY
C
om-pre
ssed
80%
(No. 2 break point)
Programming mode of compressed/expanded
Channel
Cursor
No. 1 break
point
No. 2 break
point
Programming value
(Max. 5 digits by left-justify)