Filter
Top Products
－３８－
7. PROGRAMMING
7.5
Programming Errors and Remedial Measures
An error for the programmed parameter is judged when pressing during [Storing] or [Temporarily storing]
procedures.
1 Error Judgement Flow Chart
Common programming
parameters to all channels
Ready for programming
Programming
Error occurred?
Stored
Programming parameters for
each channel
Ready for programming
Programming
Error occurred?
Temporarily stored
Programming other
channels?
Stored
2
Type of Errors and Error Display
If a programmed parameter is in error, a long tone (approx. 0.5 sec.) sounds and no storing (or temporarily storing)
is executed.
Error type Format error Programming error
Display
→Blinks
→Blinks
Details
Programmed parameter format is in error.
[1234] was programmed to [12-34] or the like,
for example.
A numeric value out of programming range
was programmed.
3 Remedial measures when an error occurs
If any key other than is pressed, it returns to the programmed parameter display. The cursor appears and
reprogramming can be executed. Reprogram by entering correct value.
NO (A short tone)
YES
(A long tone)
An error is
judged at
this sta
g
e.
NO (A short tone)
YES
(A long tone)
+
YES
NO
ENTRY
SET
END
ENTRY
Keys other than
SHIFT
Numeric and other ke
y
s
SET
END
ENTRY
SHIFT
SET
END
SHIFT
Numeric and other ke
y
s
An error is
judged at
this sta
g
e.
Keys other than
SHIFT