Filter
Top Products
－６２－
11. OTHER PROGRAMMING
11.4 Subtract Printing
3 Programming Flow Chart
<Example> Printing [Channel 1 – Channel 2] at Channel 3 within a printing range of ±250
Operation screen
[Check]
＋
[To be ready for programming]
[Programming channel for subtract
printing
]
[Programming equal]
＋
[Programming reference channel]
[Programming subtraction channel]
→
[To Mode 2]
[Programming subtract printing
range
]
Error message appears?
Temporarily sotred
Programming other channels?
＋
Stored
You can check the range
programming (including subtract
printing) of other channels.
Press or to change
channels..
If a specified value (reference value) is
programmed instead of the subtraction
channel in the flow chart, the
difference with the reference value will
be printed. Add a decimal point to the
reference value.
•Programming “to”: +
•Decimal point: in the next digit
•Deletion of decimal point: in
the next digit
Store the [temporarily stored]
parameters into the memory. (A
programming change mark is printed.)
* Fill unused digits with spaces.
Channel
Cursor
Channel
YES
Subtract printing range
∗
NO
YES
NO
Cursor
Reference channel
Subtraction
channel
Minus
Reference
channel
DISP
SHIFT
7
RANGE
SET
END
3
UNIT
SHIFT
/
1
CHART
－
(
-
)
2
TAG
ENTRY
ENTRY
SHIFT
SET
END
SHIFT
－
(
-
)
・
CLOCK
SPACE
COPY
(
=
)
Storing
Reference 3
Subtraction
channel
Subtract printing
channel
Other channels check
Reference 1
Programming reference channel
and subtraction channel
Reference 2
Various keys
Reference 3
V
ar
i
ous
keys
Any key other
than
SHIFT
Ref. 1
Ref. 2
Ref. 3
Ref. 4
/
%