Onkyo SP404 DVD Player User Manual


 
23
Connecting the Power/Turning on the DV-SP404/
DV-SP404E
Before connecting
Make sure that all the connections on pages 17 – 22
are complete (the connection to a TV is required).
Note:
This player features a screen saver and an auto power
off function. If the player is stopped and no button is
pressed for five minutes, the screen saver starts. If the
disc tray is closed but no disc is playing and no control
is pressed for 30 minutes, the player automatically
goes into standby.
STANDBY/ON
ON STANDBY
PLAY
MODE
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
RC-616DV
CLEAR
OPEN/
CLOSE
ENTER
123
6
789
0
45
ON
1
North American model:
Connect the power cord into the
power outlet on the wall.
Oceanian and European model;
Plug the supplied power cord into
the AC INLET and then into the
power outlet on the wall.
Do not use a power cord other than the
one supplied with the DV-SP404/DV-
SP404E. The power cord supplied is
designed for use with the DV-SP404/
DV-SP404E and should not be used
with any other device.
•Never have the power cord discon-
nected from the DV-SP404/DV-
SP404E while the other end is plugged
into the wall outlet. Doing so may
cause an electric shock. Always con-
nect by plugging into the wall outlet
last and disconnect by unplugging
from the wall outlet first.
2
Press STANDBY/ON on the DV-
SP404/DV-SP404E or ON on the
remote controller.
The DVD Player turns on.
•To put the DV-SP404/DV-SP404E in
the standby mode, press STANDBY/
ON on the DV-SP404/DV-SP404E, or
STANDBY on the remote controller.
Be sure to set the volume to minimum
before putting the DV-SP404/DV-
SP404E in the standby mode for the
next use to avoid sudden loud sound
reproduction.
Setting the STANDBY/ON button to
standby does not shut off the power
completely.
To a wall
outlet
ON
Remote
controller
DV-SP404.404E_En.book Page 23 Wednesday, June 7, 2006 1:50 PM