Onkyo SP404 DVD Player User Manual


 
42
Initial Settings menu
The Initial Settings menu provides audio and video out-
put settings, parental lock settings, and display settings,
among others.
If an option is grayed out it means that it cannot be
changed at the current time. This is usually because a
disc is playing. Stop the disc, then change the setting.
Notes:
In the table on next pages, the default setting is shown
in bold: other settings are shown in italics.
The Digital Audio Out settings only need to be set if
you have connected the digital output of this player to
an AV receiver, or other equipment.
Check the operating instructions supplied with your
other equipment to see which digital audio formats it’s
compatible with.
Some settings, such as TV Screen, Audio Language
and Subtitle Language may be overridden by the DVD
disc. Often these settings can also be made from the
DVD disc menu.
The HDMI Out, HDMI Resolution and HDMI Color
settings only need to be set if you connected this
player to an HDMI compatible component using the
HDMI connector.
The Digital Audio Out, Component Out and AV Con-
nector Out settings cannot be set if the player is con-
nected to an HDMI compatible component using the
HDMI connector.
Using the Initial Settings menu
1
Press SETUP and select “Initial
Settings”.
2
Use the cursor (///) but-
tons and ENTER to select the set-
ting and option you want to set.
All the settings and options are explained
on the following pages.
ON STANDBY
PLAY
MODE
DISPLAY
MENU
SETUP
TOP MENU
RETURN
AUDIO ANGLE SUBTITLE ZOOM
CLEAR
OPEN/
CLOSE
ENTER
123
6
789
0
45
ENTER
SETUP
///
SETUP
Initial Settings
ENTER
DV-SP404.404E_En.book Page 42 Wednesday, June 7, 2006 1:50 PM