Filter
Top Products
Basic Operations
13
Turning On
Insert the power cord into the wall outlet.
Press the Power Switch on the unit, then press the POWER button on the unit or on the remote control.
The unit will be turned on and you will be ready to use its features.
Turning Off
With the power on, press the POWER button on the unit or on the remote control to turn off the unit, and put the
unit in standby mode. To cut off the power completely, press the Power Switch.
List of main menus to help you with operations
VIDEO Menu (TV Mode)
AUDIO Menu (TV Mode)
SETUP Menu (TV Mode)
DISPLAY menu can only be used in D-Sub and Component mode.
Menu items that are not selectable are greyed out.
The illustrations and on-screen displays in this manual are for explanation purposes (some are enlarged, others cropped)
and may vary slightly from the actual ones.
To navigate through the OSD main menu
With the power on, press MENU and the main menu screen displays.
Press the to select menu. Press to access the menu.
Within the menu, press , , , to navigate through the options or adjust an option. Press OK to confirm a
selection or enter a sub-menu.
Press MENU or EXIT to return to the previous level menu. To exit the menu system, press MENU or EXIT
repeatedly. Or you may wait for some seconds and the on-screen menu will disappear from the screen automatically.
To clearly introduce the menu operations, this operation manual provides a description based on operation with the
remote control.
Turning On/Off the Power
Main Menu Overview
3
2
1
4
42%
48%
60%
H.Position
T
V.Position
Phase
Auto Adjust
TV
NSW ACT
Source
State
T
Rating
T
Channel Lock
Parental Lock
Password
T
Sound Mode
100Hz
1KHz
500Hz
5KHz
Balance
10KHz
SPDIF Mode
HP Volume
94%
79%
50%
79%
94%
50
19%
Custom
Auto
T
Picture Mode
Aspect Ratio
Brightness
Contrast
Color
Sharpness
Tint
Advanced
77%
50%
50%
50%
50%
50%
Custom
Wide
Auto Install
T
Manual Install
Favorite List
Manual Adjust
Channel List
RATE Menu (TV Mode) SYSTEM Menu (TV Mode)
DISPLAY Menu (D-Sub & Component Mode)