Preparations (Continued)
5
75-ohm coaxial cable (round cable)
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture
screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.
The exact type and position of the antenna will depend upon your particular area.
TV REAR
RF
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio wave
conditions.
The antenna cable should not be bundled with the power cord and the like.
Since your new TV has a digital receiver, please ensure you have the best possible antenna installation so to avoid picture defects
and disappointment, otherwise picture defects may occur.
Connect the speaker audio cable
to the external speaker output
jack on the unit matching the "+"
and "-"ends of the cable.
Unplug the plasma display and all connected components before connecting the Speakers.
The illustration may be different depending on model.
Insert the AC plug into a conveniently located AC outlet.
This product should be operated only from the type of power source indicated on the marking label.
Always unplug the AC cord from power outlet when not using for a long period of time.
Antenna Connection
Speaker Connection
Power Connection