Filter
Top Products
Important Notice
3
About Temperature
Do not use in hot and cold rooms (locations)
When the unit is used in rooms (locations) with low temperature, the picture may
leave trails or appear slightly delayed. This is not a malfunction, and the unit will
recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the screen to malfunction.
Storage temperature: 0°C to + 50°C.
Working temperature: 5°C to + 40°C;
Cleaning and
Maintenance
The front of the display panel has been specially treated. Wipe the panel
surface gently using only a cleaning cloth or a soft, lint-free cloth.
If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent
solution and then wring the cloth to remove excess liquid. Use this cloth to wipe the
surface of the display panel, then wipe it evenly with a dry cloth, of the same type,
until the surface is dry.
Do not scratch or hit the surface of the panel with fingernails or other hard objects.
Furthermore, avoid contact with volatile substances such as insect sprays, solvents
and thinner, otherwise the quality of the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry cloth.
If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then
wring the cloth dry. Use this cloth to wipe the cabinet, and then wipe it dry with a dry
cloth.
Do not allow any detergent to come into direct contact with the surface of the Plasma
Display.
If water droplets get inside the unit, operating problems may result.
Avoid contact with volatile substances such as insect sprays, solvents and thinner,
otherwise the quality of the cabinet surface may be adversely affected or the coating
may peel off. Furthermore, do not leave it for long periods in contact with articles
made from rubber or PVC.