Filter
Top Products
– 15 –
Joystick
(1) Press the SEARCH button to activate the
joystick.
When STICK has been selected as the setup menu
item No.100 (SEARCH ENA) setting, the joystick will
be activated without pressing the SEARCH button.
(2) Press the joystick to switch between the
SHTL mode and SLOW mode.
(3) When the joystick is inclined toward the
right, the tape can be played back in the
forward direction at a variable speed based
on the angle that the stick is inclined. When
the stick is inclined toward the left, the tape
is played back in the reverse direction.
• SHTL mode:
The maximum speed which is established when the
joystick has been inclined at the maximum angle
corresponds to the speed which has been set by
setup menu item No.101 (SHTL MAX).
• SLOW mode:
The speed ranges from -1.0x to +1.0x.
(4) When the joystick is inclined upward, the
tape travels in 1-frame increments in the
forward direction; when it is inclined
downward, it travels in 1-frame increments in
the reverse direction.
Slow playback is performed if the stick is
held at the top or bottom position.
PF (Programmable Function)
(1) Press the MENU button, and open the setup
menu.
(2) Incline the joystick upward or downward to
select the PF number item (A04-A06) to be
registered.
(3) When the joystick is pressed, a list of items
which can be set is displayed.
(4) Incline the joystick upward or downward to
select the item.
Registering the items in the PF buttons
(1) When the PF button is pressed, the
registered items are displayed on the monitor
screen which is output from the VIDEO MON
connector.
(2) Press the PF1, PF2 or PF3 button that
corresponds to the item whose setting is to
be changed. Each time the button is
pressed, the setting is updated in sequence.
(3) When the PF button is pressed again, the
regular display is restored. If no operations
are made, the display is also restored
automatically after five seconds elapse.
Performing operations using the PF buttons
Three setup menu items can be registered in the PF buttons, and these buttons can then be used to change the setup
menu settings by a simple operating procedure.
SETUP-MENU
<USER1>
A02
A04
A05
A06
END
P. ON LOAD
PF1 ASSIGN
PF2 ASSIGN
PF3 ASSIGN
OFF
012
513
---
NO .A04-
MENU
PF1: SYS FORMAT 50M
PF2: INT SG CB75
PF3: ------------------ --------
SETUP-MENU MENU
<USER1>
A04 PF1 ASSIGN ---
--- NO ASSIGN
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
008 DISPLAY SEL
009 CHARA H-POS
010 CHARA V-POS
SETUP-MENU
NO .A04-
(5) When the joystick is pressed, the regular
menu display screen is restored.
When the MENU button is pressed, a
confirmation screen appears. Press the PLAY
button to set.
Digital Video Cassette Recorder AJ-
SUPER
ON
OFF
TCG
REGEN
PRESET
EXT
INT
COUNTER
PF PF
1
PF
2
PF
3 DIAG
MENU
PUSH
SHTL/SLOW
TC
PRESET
METER
FULL/FINE
MONITOR SEL
RESET
REC PB
UNITY
INPUT SELECT
VIDEO AUDIO
CH 1 CH 2 CH 3 CH 4
HEADPHONES
SEARCH
EJECT
POWER
REC INHIBITCONTROL
ON
ON
OFF
OFF
LOCAL
REMOTE
RECPLAY
FFREW STOP
tte Recorder AJ-
PUSH
SHTL/SLOW
SEARCH
RECPLAY
(1)
(2)
(4)
(3)
(4)
(3)
• If the SEARCH button is pressed while the joystick is
pressed to one side, the current speed is maintained
even if the joystick is released. Pressing the STOP,
PLAY, or other operation buttons cancels the fixed
speed operation.