Filter
Top Products
– 21 –
No./Item Description
008
DISPLAY SEL
This selects what information is to
be provided by the time code and
other super displays output to the
VIDEO MON connector.
0000 TIME : Data only.
(The data indicates the value for
whichever of CTL, TC or UB
currently selected by the COUNTER
button.)
0001
T&STA :
Data and operation status.
0002 T&S&M :
Data, operation status and mode.
0003 T&RT : Data and REC TIME
0004 T&YMD :
Data and REC DATE
(year/month/day)
0005 T&MDY :
Data and REC DATE
(month/day/year)
0006 T&DMY :
Data and REC DATE
(day/month/year)
0007 T&UB :
Data and user bit.
However, when UB has been
selected with the COUNTER button,
the time code is displayed after the
user bit.
0008 T&CTL :
Data and CTL data.
However, when CTL has been
selected with the COUNTER button,
the time code is displayed after the
CTL data.
0009 T&T :
The data and time code recorded in
the VAUX area are displayed.
0010 VITC:
The time code and user bit recorded
in the VAUX area are displayed.
Notes:
•Mode display:
DVCPRO 50 (50 Mbps) =
DVCPRO_50,
DVCPRO (25 Mbps) = DVCPRO,
DV = DV, DVCAM = DVCAM
•An error message appears if a
warning or error has occurred when
“T&S&M” has been selected as this
setting.
•
REC TIME and REC DATE are
displayed during DV/DVCAM, playback
only. With the DVCPRO50 (50 Mbps) or
DVCPRO (25 Mbps) format, the
operating mode is
displayed.
No./Item Description
001
LOCAL ENA
This selects the buttons which can
be operated on the front panel when
the CONTROL switch has been set
to REMOTE.
0000 DIS :
No buttons can be operated.
0001
ST&EJ :
Only the STOP and EJECT buttons
can be operated.
0002 ENA :
All buttons can be operated.
002
TAPE TIMER
This selects the 12 or 24 hour display
for the CTL counter.
0000 ±12h : 12 hour display
0001 24h : 24 hour display
003
REMAIN SEL
This selects whether the remaining
tape time and total tape length are
to be displayed in the
superimposed display of the VIDEO
MON connector signals.
0000 OFF: No display.
0001
2L
:
The remaining tape time is
displayed on the second line.
0002 1L :
The remaining tape time is
displayed on the first line.
0003 R/TTL :
The remaining tape time is
displayed on the first line, and the
total tape length is displayed in the
second line.
Notes:
• When “2L” is selected, the remaining
tape time is not displayed if “TIME” or
“VITC” has been selected as the
setup menu item No.008 (DISPLAY
SEL) setting.
• When “R/TTL” is selected, the total
tape length is not displayed if “TIME”
or “VITC” has been selected as the
setup menu item No.008 (DISPLAY
SEL) setting.
Setup menus (continued)
USER menu <BASIC>
The underlined items indicates the initial setting.