Filter
Top Products
– 17 –
Setup (initial settings)
The unit’s main settings are performed while making selections using a menu-driven system.
When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on
the TV monitor.
Digital Video Cassette Recorder AJ-
SUPER
ON
OFF
TCG
REGEN
PRESET
EXT
INT
COUNTER
PF PF
1
PF
2
PF
3DIAG
MENU
PUSH
SHTL/SLOW
TC
PRESET
METER
FULL/FINE
MONITOR SEL
RESET
REC PB
UNITY
INPUT SELECT
VIDEO AUDIO
CH 1 CH 2 CH 3 CH 4
HEADPHONES
SEARCH
EJECT
POWER
REC INHIBITCONTROL
ON
ON
OFF
OFF
LOCAL
REMOTE
RECPLAY
FFREW STOP
(1) (5)
(2) (3)
Changing the settings
(1) Press the MENU button.
The setup menu screen appears on the TV monitor,
and the setup menu item number appears on the
counter display.
When the FF button is pressed for about 1.5 seconds,
the name of the setup menu item is displayed on the
counter display. When the same button is pressed
again for about 1.5 seconds, the original item No.
display is restored.
(If a setup was performed previously, the screen on
which the last change was made is displayed.)
(2) Incline the joystick upward or downward to
select the item to be set.
The cursor ( ) on the menu screen moves, and the
item number on the display flashes.
• When the FF or REW button is pressed while holding
down the PLAY button, what is on the display is
replaced with the next or previous major item.
(3) Incline the joystick to the left or right at the
position where the change is to be made.
The setting is now changed.
To return what has been established as the setting to
the factory setting, press the RESET button while
holding down the SEARCH button.
(4) If there is another item to be changed, repeat
steps (2) to (3).
(5) Press the MENU button.
• If none of the settings have been changed, the menu
screen display is cleared.
• If a setting has been changed, a confirmation screen
appears.
• To activate the change in the setting, press the PLAY
button.
• To cancel the change in the setting, press the STOP
button.
• To return what has been established as the setting to
the factory setting, press the RESET button while the
menu is displayed. A confirmation screen now
appears, and if the PLAY button is pressed in this
status, the factory setting is restored.
Notes:
•
If the RESET button is pressed to restore the factory
settings, only the user files currently in use are
restored. The other user files remain unaffected.
• The changes made to the SYSTEM menu contents
are recorded also by pressing the MENU button to
close the menu screen.