Filter
Top Products
– 28 –
Setup menus (continued)
The underlined items indicates the initial setting.
USER menu <VIDEO>
No./Item Description
600
INT SG
This selects the internal reference signal.
0001 BB :
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003
CB75 :
75% color bars are generated.
602
V-MUTE
SEL
This selects whether to mute the
video output signals when a blank
on the tape has been detected
during playback.
0000 N-MUTE : No muting. (Freeze)
0001
LOW RF
:Muting. (Set to gray.)
603
CC (F1)
BLANK
(For AJ-SD93P)
This selects ON or OFF for the closed
caption signal of the first field.
0000 BLANK :
Signal is forcibly blanked.
0001 THRU :Signal is not blanked.
604
CC (F2)
BLANK
(For AJ-SD93P)
This selects ON or OFF for the closed
caption signal of the second field.
0000 BLANK :
Signal is forcibly blanked.
0001 THRU
:Signal is not blanked.
605
FREEZE SEL
This selects the freeze mode for still
pictures.
0000
FIELD : Field freeze.
0001 FRAME : Frame freeze.
Note:
When frame freeze has been selected,
the frame slow status is established
with the slow setting.
609
EDH
This selects whether to
superimpose EDH onto the SDI
output signals.
0000 OFF :
EDH is not superimposed.
0001 ON : EDH is superimposed.
610
PB/PR IN LV
(For AJ-SD93P)
This selects the analog component
input level.
0000 M : M level
0001
B-CAM : ß-CAM level
614
PB/PR OUT
LV
(For AJ-SD93P)
This selects the analog component
output level.
0000 M : M level
0001
B-CAM : ß-CAM level
No./Item Description
YA94G
YA94G
This appears only when the optional board
AJ-YA93P has been installed.
This appears only when the optional board
AJ-YA94G has been installed.
YA93P
622
SETUP 25
(For AJ-SD93P)
For setting 7.5% setup processing
to be performed on input and output
signals in the DVCPRO (25 Mbps)
mode.
When the STOP button is pressed,
operation is transferred to the sub-
screen, and the setup level is set for
each output. To return from the sub-
screen, press the STOP button again.
00
CMPST IN
This selects the 7.5% setup processing
for the input composite signal.
0000 THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the
7.5% setup removed.
01
CMPST OUT
This selects the 7.5% setup processing
for the output composite signal.
0000 THRU :
The signal is output in its original
form.
0001 ADD :
The signal is output with the 7.5%
setup added.
Note:
Bear in mind the setting for sub-screen
item No. 03 (CMPNT OUT) of setup
menu item No. 622 (SETUP 25).
02
CMPNT IN
This selects the 7.5% setup processing
for the input component signal.
0000 THRU :
The signal is recorded in its original
form.
0001 CUT :
The signal is recorded with the
7.5% setup removed.
03
CMPNT OUT
This selects the 7.5% setup processing
for the output composite, component
and serial (digital) signal.
0000 THRU :
The signal is output in its original
form.
0001 CUT :
The signal is output with the 7.5%
setup removed.
0002 ADD :
The signal is output with the 7.5%
setup added.
Sub-screen
YA93P
YA93P
YA93P
YA93P
YA94G
YA93P
YA94G