Filter
Top Products
RS-232C interface
VTR
operation
Send command
SHTL
REVERSE
[STX] OSR:data [ETX]
Return (completion)
message
Supplementary notes
[STX] OSR [ETX]
This is the reverse direction shuttle command.
data = n: speed data
0: STILL
1: ×0.03
2: ×0.1
3: ×0.2
4: ×0.5
5: ×1
6: ×1.85
7: ×4.1
8: ×9.5
9: ×16
: This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
A: ×32 : This speed differs according to the setting selected for
setup menu No. 101 (SHTL MAX).
STANDBY
OFF
STANDBY
ON
[STX] OBF [ETX]
[STX] OBN [ETX]
[STX] OBF [ETX]
[STX] OBN [ETX]
This command is setting the VTR to standby OFF.
This command is setting the VTR to standby ON.
-80-