Filter
Top Products
ENGLISH
73 (E)
Setup menus
USER menu
<EDIT> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
323 JOG FWD 0000 +4.1
MAX 0001 +2
0002 +1
324 JOG REV 0000 –4.1
MAX 0001 –2
0002 –1
325 POSTROLL 0000 0s
TM 0001 1s
0002 2s
0003 3s
0004 4s
0005 5s
The underline on the setting item denotes the initial setting.
This sets the maximum JOG FWD speed.
0: +4.1 (+3.1)× speed
1: +2 (+1.85)× speed
2: +1× speed
<Notes>
• The value for the DV/DVCAM format is shown in parenthesis
().
• The maximum speed is set to +2 (+1)× when the dial on the
front panel is operated.
• At any speed setting other than 0 (+4.1×), the phase cannot
be synchronized from an editing controller which synchro-
nizes the phase using the JOG command.
This sets the maximum JOG REV speed.
0: –4.1 (–3.1)× speed
1: –2 (–1.85)× speed
2: –1× speed
<Notes>
• The value for the DV/DVCAM format is shown in parenthesis
().
• When the dial on the front panel is operated, the maximum
speed is set to –1 (–1)×.
This sets the postroll time.
Any time from 0 to 5 seconds can be set in 1-second units.