Filter
Top Products
Setup menus
86 (E)
USER menu
<V BLANK> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
802 TELETEXT 0000 MOJI
SEL
0001 NABTS
803 TELETEXT 0000 OFF
DET 0001 AUTO
0002 MANU
Sub-screen (625 mode)
00 REC LINE1 0000 OFF
: : 0001 7&320
: : 0002 8&321
: : 0003 9&322
: : 0004 10&323
: : 0005 11&324
: : 0006 12&325
: : 0007 13&326
: : 0008 14&327
: : 0009 15&328
: : 0010 16&329
: : 0011 17&330
: : 0012 18&331
: : 0013 19&332
: : 0014 20&333
: : 0015 21&334
14 REC LINE15 0016 22
Sub-screen (525 mode)
00 REC LINE1 0000 OFF
: : 0001 10&273
: : 0002 11&274
: : 0003 12&275
: : 0004 13&276
: : 0005 14&277
: : 0006 15&278
: : 0007 16&279
: : 0008 17&280
: : 0009 18&281
: : 0010 19&282
: : 0011 20&283
: : 0012 21&284
12 REC LINE13 0013 22
The underline on the setting item denotes the initial setting.
For selecting the type of teletext signals to be recorded.
0: MOJI system
1: NABTS system
<Note>
This setup menu item is not displayed in the 625 mode.
For selecting the method used to detect the lines in which the
teletext signals are to be recorded.
0: The teletext signals are not recorded.
1: The teletext signals are automatically detected and re-
corded.
2: The lines in which the teletext signals are to be recorded
are selected and set.
<Notes>
• The number of lines in which the teletext signals can be
recorded depends on the number of recording lines which
was entered as the setup menu No. 800 (ADD LINE 25) or
No. 801 (ADD LINE 50) setting. [See “Number of lines which
can be set for teletext.”]
• When setting “2 (MANU)” is selected and the STOP button is
pressed, operation transfers to the sub-screen, and the
number of recording lines can be selected. To return from
the sub-screen, press the STOP button again.
For selecting the lines in which the teletext signals are to be
recorded.
Factory mode settings
REC LINE1: OFF
REC LINE2: OFF
REC LINE3: OFF
REC LINE4: OFF
REC LINE5: OFF
REC LINE6: OFF
REC LINE7: OFF
REC LINE8: OFF
REC LINE9: OFF
REC LINE10: OFF
REC LINE11: OFF
REC LINE12: OFF
REC LINE13: OFF
REC LINE14: OFF
REC LINE15: OFF
For selecting the lines in which the teletext signals are to be
recorded.
Factory mode settings
REC LINE1: OFF
REC LINE2: OFF
REC LINE3: OFF
REC LINE4: OFF
REC LINE5: OFF
REC LINE6: OFF
REC LINE7: OFF
REC LINE8: OFF
REC LINE9: OFF
REC LINE10: OFF
REC LINE11: OFF
REC LINE12: OFF
REC LINE13: OFF