Panasonic AJ-D960EG VCR User Manual


 
ENGLISH
83 (E)
Setup menus
USER menu
<V BLANK>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
800 ADD LINE 0000 OFF
25 0001 YC422
0002 YC411
0003 Y1_B/W
0004 Y1_BPF
0005 C1
0006 Y2_B/W
0007 Y2_BPF
0008 C2
Sub-screen (625 mode)
00 REC LINE1 0000 7L
..
..
..
0015 22L
0016 320L
..
..
..
0031 335L
0032 623L
01 REC LINE2 0000 7L
..
..
..
0015 22L
0016 320L
..
..
..
0018 322L
..
..
..
0031 335L
0032 623L
Sub-screen (525 mode)
00 REC LINE1 0000 10L
..
..
..
0012 22L
0013 263L
0014 273L
..
..
..
0025 284L
0026 525L
01 REC LINE2 0000 10L
..
..
..
0012 22L
0013 263L
0014 273L
..
..
..
0016 275L
..
..
..
0025 284L
0026 525L
The underline on the setting item denotes the initial setting.
For selecting the mode for recording signals on additional lines.
0: No signals are recorded on additional lines.
1: The 422 mode signals are recorded on 1 line.
2: The 411 mode signals are recorded on 1 line.
3: Only the Y signal is recorded on 1 line directly.
4: Only the Y signal is recorded on 1 line after it has been
separated from the C signal.
5: Only the C signal is recorded on 1 line.
6: Only the Y signal is recorded on 2 lines directly.
7: Only the Y signal is recorded on 2 lines after it has been
separated from the C signal.
8: Only the C signal is recorded on 2 lines.
<Notes>
When a setting from “1” to “8” is selected and the STOP
button is pressed, operation transfers to the sub-screen, and
the recording line or lines can be selected. To return from the
sub-screen, press the STOP button again.
The setting takes effect when the system format is 25 Mbps.
For selecting the additional line where the signals are to be
recorded.
For selecting the additional line where the signals are to be
recorded.
<Note>
This menu item is not displayed when additional line mode
setting “1” through “5” has been selected.
For selecting the additional line where the signals are to be
recorded.
For selecting the additional line where the signals are to be
recorded.
<Note>
This menu item is not displayed when additional line mode
setting “1” through “5” has been selected.
• Number of lines which can
be set for TELETEXT
When 25 Mbps is the recording/
playback format.
ADD LINE
Number of lines
25
which can
setting value
be set
525 mode 625 mode
YC422 5 7
YC411 8 10
Y1_B/W 13 14
Y1_BPF 13 14
C1 13 14
Y2_B/W 5 7
Y2_BPF 5 7
C2 5 7