Panasonic AJ-D960EG VCR User Manual


 
Setup menus
84 (E)
USER menu
<V BLANK> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
801 ADD LINE 0000 OFF
50
0001 YC422
002 Y4_B/W
0003 Y4_BPF
0004 C4
Sub-screen (625 mode)
00 REC LINE1 0000 7L
..
..
..
0015 22L
0016 320L
..
..
..
0031 335L
0032 623L
01 REC LINE2 0000 7L
..
..
..
0015 22L
0016 320L
..
..
..
0018 322L
..
..
..
0031 335L
0032 623L
02 REC LINE3 0000 7L
..
..
..
0003 10L
..
..
..
0015 22L
0016 320L
..
..
..
0031 335L
0032 623L
03 REC LINE4 0000 7L
..
..
..
0015 22L
0016 320L
..
..
..
0019 323L
..
..
..
0031 335L
0032 623L
The underline on the setting item denotes the initial setting.
For selecting the mode for recording signals on additional
lines.
0: No signals are recorded on additional lines.
1: The 422 mode signals are recorded on 2 lines.
2: Only the Y signal is recorded on 4 lines directly.
3: Only the Y signal is recorded on 4 lines after it has been
separated from the C signal.
4: Only the C signal is recorded on 4 lines.
<Notes>
When a setting from “1” to “4” is selected and the STOP
button is pressed, operation transfers to the sub-screen, and
the recording lines can be selected. To return from the sub-
screen, press the STOP button again.
The setting takes effect when the system format is 50 Mbps.
For selecting the additional line where the signals are to be
recorded.
For selecting the additional line where the signals are to be
recorded.
For selecting the additional line where the signals are to be
recorded.
<Note>
This menu item is not displayed when setting “1” has been
selected as the additional line mode.
For selecting the additional line where the signals are to be
recorded.
<Note>
This menu item is not displayed when setting “1” has been
selected as the additional line mode.
• Number of lines which can
be set for TELETEXT
When 50 Mbps is the recording/
playback format.
ADD LINE
Number of lines
50
which can
setting value
be set
525 mode 625 mode
YC422
Y4_B/W
10 15
Y4_BPF
C4