Filter
Top Products
16
RQT9338
Basic play (Playing video contents)
(continued)
Starting from a selected item
During playback, you can access specific recordings or scenes
through direct entry of the numbered buttons.
Play starts from the selected title or chapter.
≥While stopped (the image on the right is
displayed on the screen), the title is
designated. While playing, the chapter is
designated.
Frame-by-frame
While paused, press [2] (2;) or [1] (;1).
Each press shows the next frame.
≥Press and hold to change in forward or backward succession.
≥Press [1] (PLAY) to revert to normal playback speed.
≥[BD-V] [AVCHD] : Forward direction [1] (;1) only.
Screen Aspect
When black bars are shown at the top, bottom, left, and right
sides of the screen, you can enlarge the image to fill the
screen.
1Press [OPTION].
2Press [3, 4] to select “To Others” and press [OK].
3Press [3, 4] to select “Screen Aspect” and press [OK].
4Press [2, 1] to select “Side cut” or “Zoom”.
Normal: Normal output
Side cut: The black bars on the right and left sides of the
16:9 image disappear and the image is enlarged.
Please note that the right and left sides of the
image are cut off when the black bar is not
displayed.
Zoom: The black bars on the top and bottom sides of the
4:3 image disappear and the image is enlarged.
Please note that the top and bottom sides of the
image are cut off when the black bar is not
displayed.
≥Please note that the top, bottom and sides of the image will
be cut off in images with no black bars.
≥Screen aspect will return to “Normal” in the following
instances:
j Playback of images starts/ends
j The unit is turned on/off
≥[BD-V] [DVD-V]: “Side cut” does not have any effect.
≥When “TV Aspect” (> 34) is set to “4:3 Pan & Scan” or “4:3
Letterbox”, the “Zoom” effect is disabled.
Status messages
The status messages give you information about what is
currently being played. Each time you press [STATUS], the
information displayed will change.
≥It is also possible to display with the following procedures:
1Press [OPTION].
2Select “Status” with [3, 4], and select [OK].
Changing audio during play
≥It is also possible to display with the following procedures:
1Press [OPTION].
2Select "To Others" with [3, 4], and select [OK].
3Select "Audio" with [3, 4], and select [OK].
[BD-V] [DVD-V]
You can change the audio channel number each time you
press [AUDIO] or [3, 4]. This allows you to change the
soundtrack language (> 23, Soundtrack), etc.
[DVD-VR] [DivX] [MPEG2]
AudioLR>AudioL>Audio R
^---------------------------------}
You can change soundtracks each time you press [AUDIO] or
[OK].
[BD-V] [AVCHD]
e.g., 5: [0] B [0] B [5]
15: [0] B [1] B [5]
[DVD-V]
e.g., 5: [0] B [5]
15: [1] B [5]
PLAY
BD-Video
T1 C1 0:05.14
0:20.52
T: Title
C: Chapter
PL: Playlist
Items change
depending on the
disc played.
No display
Current position
Type of disc
Play status
Elapsed time in the title
e.g., [BD-V]
Depending on the kind of disc or the playback status, this
display may not appear.
Total time
Soundtrack
1 ENG
Digital 3/2.1ch
English is selected.
e.g., [DVD-V]
PLAY
DVD-RAM(VR)
AudioLR
“AudioLR”
is selected
e.g.,
DMPB15EB-RQT9338_eng.book 16 ページ ２００９年３月２７日 金曜日 午後１０時１３分