Filter
Top Products
34
RQT9338
Changing the unit’s settings (continued)
* Only for the United Kingdom and Continental Europe.
“Display”
On-Screen Massages
Choose whether to show status messages automatically.
≥Automatic
≥Off
On-Screen Language*
Choose the language for these menus and on-screen messages.
≥English
≥Français ≥Español
≥Deutsch ≥Italiano ≥Nederlands
Screen Saver Function
This is to prevent burn-in on the television screen.
≥On
:
j No activity has occurred for 10 minutes or longer, the
screen swtiches to the other states automatically.
j When playing the 4:3 image, the masked-off area on the
screen become grey.
[Only when connecting with an HDMI cable, “TV Aspect”
(D below) is set to “16:9” and “HDMI Video Format”
(D below) is set to any mode other than“576p/480p”.]
≥Off
Software License
Information about the software used by this unit is displayed.
“TV Aspect / HDMI Function Settings”
TV Aspect
“TV Aspect” operates on the screen of the unit or the connected
TV.
To view an image connected to a 4:3 TV:
≥4:3 Pan & Scan: Video recorded for a widescreen is played
as Pan & Scan (unless prohibited by the
producer of the disc). When playing BD-
Video, video is output as “4:3 Letterbox”.
≥4:3 Letterbox: Video recorded for a widescreen is played
in the letterbox style.
To view an image on the unit or connected to a 16:9
widescreen TV:
≥16:9
: Video recorded for 4:3 aspect screen is
displayed as a 4:3 ratio image in the
centre of the screen.
≥16:9 full: Video recorded for 4:3 aspect screen is
displayed as a horizontally stretched 16:9
image.
HDMI Connection
≥Press [OK] to show the following settings.
HDMI Video Format
The items supported by the connected devices are indicated on
the screen as “¢”. When any item without “¢” is selected, the
images may be distorted.
≥If the image is distorted, set to "576p/480p" or set again
correctly.
≥Automatic
: Automatically selects the output
resolution best suited to the connected
television
(1080/24p*, 1080i, 720p or 576p/480p).
≥576p/480p ≥720p
≥1080i
j When the unit is connected to an amplifier/receiver that
does not support the resolution set on the unit, the video
cannot be output properly.
* 1080/24p can only be output in the conditions below when
"24p Output" (D below) is set to "On".
j [BD-V] Playing back 24p images
j [DVD-V] Playing back with the settings for playback "24p"
(> 24) "On"
24p Output [BD-V] [DVD-V]
This unit displays each frame at 1/24 second intervals - the same
interval originally shot with the film camera.
≥Only when this unit is connected to a TV supporting 1080/24p
output via an HDMI cable, you can set to “On”.
≥If this unit is connected to an HDTV through other equipment, it
must also be 1080p compatible.
≥On: Images in 1080/24p are output in 24p as they are.
j When outputting 1080/24p signal, we recommend using
High Speed HDMI Cables that have the HDMI logo (as
shown on the cover) and are less than 5.0 meters to
prevent video distortion etc.
≥Off
HDMI Output Range
Effective when connected to a device that only supports RGB
output.
≥Standard
: The video is output as it is.
≥Enhanced: When the black and white contrast of a video is
low, the signal is enhanced to reproduce clear
video.
HDMI Audio Output
Set whether or not to output audio from the HDMI AV OUT
terminal.
≥On
≥Off
DMPB15EB-RQT9338_eng.book 34 ページ ２００９年３月２７日 金曜日 午後１０時１３分