Filter
Top Products
Getting started
RQT9334
(ENG)
13
Adjusting the pictures on
the LCD screen
1
Press [LCD].
≥
It is also possible to display with the following procedures.
2 Select the item with [3, 4].
3 Change the setting with [3, 4, 2, 1].
≥Underlined items are the factory presets.
∫When selecting other settings than “AUX” with
[AV SELECT]
Picture:Adjusting image quality
Monitor:Displaying images
∫When selecting “AUX” with [AV SELECT] (> 25)
PICTURE:Adjusting image quality
MONITOR:Displaying images
≥If you are not using the LCD on this unit, select “Off (OFF)” to
conserve power. (The [Í] indicator flashes.)
≥If the settings in “PICTURE” are changed when “AUX” is
selected, the settings in “Picture” will also change.
The settings will change in the same way even when
something other than “AUX” is selected.
To exit the screen
Press [LCD] or [RETURN].
To display images when the “Monitor (MONITOR)” is
set to “Off (OFF)”
Press [LCD] or [SUB MENU]
Loading the disc or SD
card
1
Open the screen and press [OPEN].
2 Set the disc holding the unit with your hand
and close the lid.
3 Close the screen.
≥Some discs may start playing when it is loaded with the unit
turned on.
≥About discs with a cartridge
j BD-RE with a cartridge: It cannot be used with this unit. (It
cannot be used even if the disc is taken out from the
cartridge.)
j DVD-RAM, 8 cm disc: Remove the disc from the cartridge
and set the disc in the tray
j Place the disc back into the cartridge for storage to prevent
dirt and scratches after use.
≥Do not touch the lens as it may
make it dirty.
1 Open the cover at the side of the unit.
2 Insert the SD card into the SD card slot.
≥Press on the center of the card until it clicks into place.
3 Close the cover.
To remove the card
In step 2 above, press the center of the card until it “clicks”, and
pull the card out straight.
1 Press [SUB MENU].
2
Select “Other Functions” with
3
,
4
], and select
[OK].
3 Select “LCD Menu” with 3, 4], and select
[OK].
≥Standard: Standard
≥Dynamic
: Picture with high contrast
≥Night: Picture suitable for viewing in dark places
≥User j Brightness :j5 to +5
j Color :j5 to +5
≥On
:
≥Off:
Image display
No image
≥STANDARD: Standard
≥DYNAMIC
: Picture with high contrast
≥NIGHT: Picture suitable for viewing in dark places
≥USER j BRIGHTNESS :j5 to 5
j COLOR :j5 to 5
≥NORMAL
:
≥FULL:
≥OFF:
When you want to view 4:3 images
When you want to view 16:9 images
No image
LCD Menu
Picture
Dynamic
Monitor On
Brightness
Color
RETURN
SUB
MENU
Disc
SD card
Label side up
(Double-sided disc:
place the label side
up that you want to
play back)
Clicks
into place.
Lens (> below)
Lens
Label side
Insert the card with
the corner cut-side
up.
DMPB15P-RQT9334_eng.book 13 ページ ２００９年３月２８日 土曜日 午後２時３９分