Filter
Top Products
RQT9334
(ENG)
42
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions
indicated in the chart do not solve the problem, refer to “Customer Services Directory (United States and Puerto Rico)” on page 50
if you reside in the U.S.A. and Puerto Rico, or refer to “Product information” on page 51 if you reside in Canada.
To reset this unit
Power
The following do not indicate malfunction.
≥Sound from the AC adaptor during recharging.
≥The battery pack warming up when recharging or during use.
≥The surface and area around the unit becoming warm when used for long periods.
Move the unit after waiting for 3 minutes after unplugging the AC adaptor when it needs to be moved or maintained.
≥Operating noises when the unit is turned on.
Safety devices may be operating when the unit does not respond to operations.
1 Press [POWER Í/I] on the unit to turn it off.
If the unit is not turned off, hold down for approximately 3 seconds to force the power off.
2 Press [POWER Í/I] on the unit to turn it on.
If operation is still not possible after performing the above operations, consult the dealer where the unit was purchased.
To restore the unit if it freezes
due to one of the safety devices
being activated.
≥Press and hold [POWER Í/I] on the unit for 3 seconds.
(The settings remain unchanged.)
To return all settings other than
some settings to the factory
preset.
≥Select “Yes” in “Restore Default Settings” in the Setup menu.
This returns all values in the Setup menu and the on-screen menu, except for “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server Settings”, “DVD-Video Ratings”, “BD-
Video Ratings” and “Network Service” to the default settings. (> 36)
To return all settings to the
factory preset
≥Reset the unit as follows:
1 Press [POWER Í/I] on the unit to turn off the unit.
2 Press and hold [POWER Í/I] and [RETURN ] on the unit at the same time for more
than 5 seconds until “PLEASE WAIT” is displayed on the LCD.
3 The power will turn on and then turn off.
No power. ≥Check connections to the AC adaptor or battery pack. (> 11)
≥The unit has protection circuitry that is activated if it becomes too hot or too cold. The unit
will not work if this occurs. Use the unit between 5
o
C (41
o
F) and 35
o
C (95
o
F).
≥Hold down [POWER Í/I] for some time.
≥The unit may not come on immediately after it is turned off. Once the “BYE” display
disappears, press [POWER Í/I] and turn the unit on.
≥The unit can be turned on only when the unit is closed with the screen facing outwards
(> 10, 3 or 4 in “Installation of the unit”).
Unit turns off automatically. ≥The unit turns off after it has been stopped for about 15 minutes (about 5 minutes when the
unit is powered by the battery pack) to conserve power (only when “Auto Power Off” in the
Setup menu is set to “On”). (> 36) Turn the unit on again.
≥Press [OFF TIMER] and the unit will be turned off automatically. (> 12)
≥Safety devices may be operating. Press [POWER Í/I] and turn the unit on.
≥
When using VIERA Link (HDMI), the unit will be automatically turned off if the TV is turned off.
If VIERA Link (HDMI) is not being used, set “VIERA Link” settings to “Off”. (
>
34)
≥If the screen is rotated when the unit is turned on, the display on the screen will disappear
and the unit will be automatically turned off. (> 10)
Cannot charge or the [CHARGE]
indicator fails to light.
≥The charging time increases when the temperature is too hot or too cold, and charging may
not be possible under some circumstances.
≥Check connections to the AC adaptor or battery pack. (> 11)
Play time dramatically reduced
after recharging.
≥The battery pack has reached the end of its service life (It can be recharged about 300
times).
DMPB15P-RQT9334_eng.book 42 ページ ２００９年３月２８日 土曜日 午後２時３９分