Filter
Top Products
Settings
RQT9334
(ENG)
33
“Video”
Still Mode (paused video) [BD-V] [AVCHD] [DVD-V]
Select the type of picture shown when you pause playback
(> 48, Frames and fields).
≥Auto
≥Field: Select if jittering occurs when “Auto” is selected.
(The picture is coarser.)
≥Frame: Select if small text or fine patterns cannot be seen
clearly when “Auto” is selected.
(The picture is clearer and finer.)
Seamless Play ]DVD-VR]
Select the play mode between playlist chapter segments and
partially deleted titles.
≥On
: The chapters in playlists are played seamlessly. This
does not work while searching or when there are
several audio types included on the playlist.
Additionally, the positioning of chapter segments may
change slightly.
≥Off: The points where chapters in playlists change are
played accurately, but the picture may freeze for a
moment.
“Audio”
Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
Change the dynamic range (> 48) for late night viewing.
≥On ≥Off
Digital Audio Output
≥Press [OK] to show the following settings.
≥For details on digital output (> 37)
Dolby D/Dolby D +/
Dolby TrueHD
Select whether Dolby Digital,
Dolby Digital Plus, Dolby TrueHD,
DTS Digital Surround,
DTS-HD High Resolution Audio or
DTS-HD Master Audio is output in
“Bitstream” or “PCM” format.
≥Not making the proper settings
may result in noise.
≥If the unit is connected with the
HDMI AV OUT terminal, the
specifications of the connected
equipment take precedence over
this unit and audio selected in
these items may not be output
(e.g., when a television is
connected, the HDMI audio output
of this unit is limited to down-
mixed 2ch.)
≥Bitstream
:
Select “Bitstream” when the connected equipment can
decode the respective audio format.
j Connect equipment supporting HDMI (High Bit rate Audio)
and use a High Speed HDMI Cable in order to output high
bit rate audio such as Dolby Digital Plus, Dolby TrueHD,
DTS-HD High Resolution Audio or DTS-HD Master Audio.
≥PCM:
Select “PCM” when the connected equipment cannot decode
the respective audio format.
Refer to the operating instructions for connected devices to
verify whether or not they can decode each of the audio
formats.
DTS/DTS-HD
BD-Video Secondary Audio
[BD-V]
Turn on/off the button click sound on the menu and audio with
secondary video in picture-in-picture mode. (> 17)
≥On
: The primary audio and secondary audio are mixed
and output. The sampling frequency is converted to
48 kHz.
≥Off: The button click sound on the menu and secondary
audio are not output.
Downmix
Switch the downmix system for playing back multi-channel
surround sound.
≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is
set to “Bitstream”, there are no downmix effects for the
outputted audio.
≥The audio will be outputted in “Stereo” in the following cases:
j AVCHD playback
j Playback of button click sound on the menu and audio with
secondary video in picture-in-picture mode
≥Stereo
: When connected to equipment that does
not support the virtual surround function.
≥Surround encoded:When connected to equipment that
supports the virtual surround function (to
convert 2-channel to multi channel
surround).
DMPB15P-RQT9334_eng.book 33 ページ ２００９年３月２８日 土曜日 午後２時３９分