Filter
Top Products
VQT2J81
(ENG)
48
No sound from the unit’s speaker.
¾The speaker is off if headphones are connected.
¾Turn up the volume. (> 14)
Cannot hear the desired audio type.
¾Press [AUDIO] to select the audio. (> 17)
¾[DivX]: Audio may not be output depending on how files were
created. (> 42)
Cannot switch audio.
¾There are discs for which audio cannot be changed because
of how the disc was created.
The images from this unit do not appear on the
television.
Picture is distorted.
¾Make sure that the television is connected to HDMI AV OUT
terminal on this unit. (> 28)
¾Make sure that the television’s input setting (e.g., VIDEO 1) is
correct.
¾When “24p Output” is set to “On”, HDMI authentication takes
place where 24p images switch to other images, and a black
screen is displayed. (> 38)
¾When “24p Output” is set to “On”, jittering may occur while
playing DVD-Video other than 24p images. In this case, turn
“24p Output” to “Off”. (> 38)
¾An incorrect resolution is selected in “
HDMI Resolution
”,
when the television is connected to HDMI AV OUT terminal.
Set the item again.
¾Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Video is not output in high definition.
¾Confirm that the “HDMI Resolution” in the Setup menu is set
properly. (> 38)
Audio is not output in bitstream.
¾Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not
output in bitstream. To output the bitstream, select “Restore
Default Settings” to restore the factory presets and make
proper settings.
The 4:3 aspect ratio picture expands left and right.
Screen size is wrong.
¾Use the television to change the aspect. Refer to your
television’s operating instructions.
¾When using an HDMI cable, change “TV Aspect” type to “4:3
Pan & Scan”. (> 38)
No sound from other speakers.
¾Check all connections and settings. (> 28)
Cannot hear the desired audio type.
¾Audio may not be heard when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
Cannot switch audio.
¾When connecting an amplifier/receiver using an HDMI cable,
you cannot switch the audio if “Dolby D/Dolby D +/Dolby
TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby
D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.
(> 37)
The capacity of the SD card decreased.
¾When a BD-Video that supports BD-Live is used, and an SD
card is in the slot, data may be written to the SD card. (> 18)
Music on an SD card cannot be played.
¾Data that can be played from an SD card are AVCHD,
MPEG2 and JPEG data. (> 7)
The contents of the card cannot be read.
¾The card is not compatible or the contents on the card may
be damaged. (> 7)
¾Turn off and then turn on the unit again.
Still picture or motion picture does not display.
¾Check that the SD card is inserted. (> 13)
¾It is not a format compatible with this unit. Or, the contents of
the SD card may be damaged. (> 7)
¾Playback of still pictures and motion pictures that were edited
with a PC etc. may not be possible.
Sound
Connection
Card
Photo Frame
DMPB500PP-VQT2J81_eng.book 48 ページ ２０１０年３月１６日 火曜日 午後４時８分