Filter
Top Products
Getting started
VQT2J81
(ENG)
9
1 Turn the unit on and off (> 11)
2 Show the Home screen of the VIERA CAST
(> 34)
3 Select title numbers, etc./Enter numbers (> 17)
4 Cancel the values that were entered
5 Show on-screen menu (> 26)
6 Switch on/off Secondary Video (Picture-in-
Picture) (> 18)
7 Basic operations for playback (> 14 – 16)
8 Show Status messages (> 17)
9 Show Top Menu/Direct Navigator (> 14)
10 Show the Sub Menu
11 Use according to the instructions on the screen
12 Playback as a Photo Frame (> 20)
13 Switch the display mode of Photo Frame (> 20)
14 Switch the drive to playback (> 8)
15 Change the Setup of this unit (> 36)
16 Change the screen settings (> 12)
17 Turn the unit off automatically (> 11)
18 Adjust the volume (> 14)
19 Mute the sound
Press again to clear
20 Switch on/off Secondary Audio (> 18)
21 Exit the menu screen
22 Show Pop-up Menu (> 14)
23 Show FUNCTION MENU (> 12)
24 Selection/OK, Frame-by-frame
25 Return to previous screen
26 Select audio (> 17)
27 Switch the display design of Photo Frame (> 20)
∫ Insert the batteries (included)
Insert so the poles (i and j) match those in the remote
control.
≥ After inserting the batteries, close the cover so it is as it was
by inserting the s (minus) side first.
∫ Range of use
The distance and angles are approximate.
Remote control
チ
24
20
25
27
26
18
14
17
21
22
23
19
16
15
1
3
6
7
5
4
11
12
8
10
9
2
13
≥ To select: Press up, down, left, or right ([3, 4, 2, 1])
≥ To enter: Press [OK]
≥ Frame forward / Frame backward:
(While paused) press left or right ([2;][;1])
R6/LR6, AA
(Alkaline or manganese
batteries)
1
2
Remote control
signal sensor
Within 30 degrees angle
either left or right
Within 20 degrees
angle either up or
down
Remote control transmitter
Within 7 m (23 ft.) in front
DMPB500PP-VQT2J81_eng.book 9 ページ ２０１０年３月１６日 火曜日 午後４時８分