Filter
Top Products
27
RQT8307
Recording
You can check, change or delete a program set for scheduled
recording on the television screen.
1 Press [SCHEDULE].
2 Press [3, 4] to select the program.
∫ To change the recording frequency
Press the “Green” button.
∫ To change the time, recording mode and
recording drive
Press [ENTER]. (➡ 24, To change the setting, step 4)
∫ To delete the program
Press the “Blue” button.
∫ To exit the screen
Press [TV GUIDE].
Returns to the television screen.
≥The unit is not off. To save power, turn the unit off by pressing
[Í DVD POWER].
∫ When there is a duplicate or overlapping
program scheduled recording
The program scheduled recording that was set last is recorded.
None of the program that was set earlier is recorded even if there is
only partial overlapping.
Program scheduled recordings that are not recorded are highlighted
in grey.
Check, change or delete a program
FAVORITES
Sat 2:00pm Dodzilla Once
Sat 1:00pm NWBG
Once
Sat 3:00pm Bull house Weekly
Sat 3:30pm Be switched Weekly
4/3
4:00pm Baseball Once
LISTINGSMESSAGES SCHEDULE
R
R
R
W
R
W
R
SET TIMER
RECORD
Sat
1:00pm NWBG Once
REMOVE
FREQUENCY
INFO.
87
NWBG
SP
HDD
R
1:00 1:55
Channel or program name (a program name that was set
for scheduled recording using TV Guide On Screen
TM
system or VCR Plusi system that was listed in the
program list)
Recording mode (➡ 21)
Recording drive
Frequency (➡ 24, Step 3,
➡ 25, Step 4)
Program set last
Recorded
Time
Programs set earlier
Not recorded
Not recorded
Notes on scheduled recording
≥“F” flashes when the unit cannot go to scheduled recording
standby.
≥Scheduled recordings are activated regardless of whether the
unit is turned on/off.
≥Scheduled recordings do not begin while transferring (dubbing)
in normal speed mode (➡ 43).
≥If the unit is turned on when scheduled recording begins, it
remains turned on after recording finishes. It does not turn off
automatically. You can turn the unit off during scheduled
recording.
≥When you program successive scheduled recordings to start
immediately one after the other, the unit cannot record the part
at the ending of the earlier program (approximately 15
seconds). In addition, when recording to DVD-R, DVD-RW
(DVD-Video format) or +R, the unit cannot record the part at the
beginning of the later program (approximately 15 seconds).
e.g., When you program successive one hour scheduled
recordings to start at 10:00 and 11:00
Program1 10:00–11:00
Program2 11:00–12:00
≥If you set DST (Daylight Saving Time) to ON when manually
setting the clock (➡ 17), scheduled recording may not work
when summer switches to winter and vice versa.
∫ Relief Recording
When the recording drive is set to “DVD” for scheduled
recording and if the program will not fit onto the disc, the
recording drive will be changed to the “HDD” automatically.
If there is no disc in the tray or the disc cannot be recorded on or
when scheduled recording starts while transferring (dubbing), the
recording drive will be changed to the HDD.
≥The Direct Navigator shows which programs were relief-
recorded (“ ” is displayed.)(➡ 30).
≥If the time remaining on the HDD is insufficient, as much of the
program as possible will be recorded onto the HDD.
Program1
Program2
Recorded
Not recorded (approximately 15 seconds)
Recorded
[-R] [-RW‹V›] [+R]
Not recorded (approximately 15 seconds)
11:00
EH60English.book Page 27 Monday, July 4, 2005 10:39 AM