Panasonic DMR-EH68 DVD Recorder User Manual


 
17
RQT9075
Recording television programmes
Refer to “Important notes for recording” (
20
) and
“Advanced recording” (
21
) for detail information.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
[RAM] [-RW‹V›] [+R] [+RW]
To use a new disc, formatting is necessary.
Preparation
Turn on the television and select the appropriate AV input to suit
the connections to this unit.
Turn on this unit.
1 Press [DRIVE SELECT] to select the
HDD or DVD drive.
The HDD or DVD indicator lights up on the unit’s display.
2 If you selected the DVD drive
Press [< OPEN/CLOSE] on the main
unit to open the tray and insert a disc.
Press the button again to close the tray.
3 Press [WXCH] to select the channel.
To select with the numbered buttons:
4 Press [REC MODE] to select the
recording mode (XP, SP, LP or EP).
Recording modes and approximate recording times (21)
To record sound using LPCM (XP mode only):
Set the “Audio Mode for XP Recording” to “LPCM” in the
Setup menu (59).
5 Press [¥ REC] to start recording.
Recording will take place on open space on the HDD or on
disc. Data will not be overwritten.
You cannot change the channel or recording mode during
recording.
You can record while the unit is in standby for timer
recording. However, once the time for the timer recording to
begin is reached, any recording taking place will stop and
the timer recording will begin.
[HDD] [RAM] When “Rec for High Speed Copy” is set to “Off”
(58), you can change the audio being received by
pressing [AUDIO] during recording. (Does not affect the
recording of audio.)
To pause recording
Press [;].
Press again to restart recording.
You can also press [¥ REC] to restart.
(Title is not split into separate titles.)
To stop recording
Press [].
From the start to the end of the recording is called one title.
[-R] [-RW‹V›] [+R] [+RW] It takes about 30 seconds for the unit to
complete recording management information after recording
finishes.
In order to play DVD-R, DVD-RW (DVD-Video format) and +R
(recorded with this unit) on other DVD players, it is necessary to
finalise them (56).
[USB] It is not possible to record on a USB memory.
[SD] It is not possible to record on a card.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
During recording
Press [¥ REC] on the main unit to select the recording
time.
You can specify up to 4 hours later.
The unit display changes as shown below.
This does not work during timer recordings (18, 24) or while
using Flexible Recording (22).
The unit turns off automatically after the time to stop recording is
reached.
To cancel
Press [¥ REC] on the main unit several times until the counter
appears.
The time to stop recording is cancelled; however, recording
continues.
To stop recording
Press [].
e.g., 5: [0] [5]
15: [1] [5]
STATUS
F Rec
REC MODE
REC
MANUAL SKIP
AUDIO DISPLAY
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
P
R
O
G
/
C
H
E
C
K
RETURN
PLAY/x1.3
PAU SE
STOP
SLOW/SEARCH
SKIP
INPUT SELECT
CH
0
9
8
7
6
54
3
2
1
CH
AV
¦
TV
DRIVE
SELECT
¦
DVD
VOL
DELETE
G-Code
EXIT
TIME SLIP
OK
OPTION
-/--
1
3
w
AUDIO
5
4
OPEN
/
CLOSE
REC
3 5
2
w
Numbered
buttons
e.g., [Australia]and]N.Z.]
RECREC
RECREC
Remaining time
on the disc
REC
Quick Start (61)
1 Sec. Quick Start for Recording on DVD-RAM and HDD
(When connecting to TV using 21-pin Scart, Component Video,
Video or S Video terminals)
From the power on, recording on DVD-RAM and HDD starts in
about 1 second after the REC button is pressed. (Quick Start
Mode)
“Quick Start” is set to “On” at the time of purchase.
Depending on the type of TV or the connected terminal, it may
take time to display the screen.
[Note]
Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-
RAM.
–You want to make other operations.
–The clock has not been set.
To specify a time to stop recording—
One Touch Recording
OFF 0:30 ""# OFF 1:00 ""# OFF 1:30 ""# OFF 2:00
^" Counter (cancel) ,"" OFF 4:00 ,"" OFF 3:00 ,}
Playing recorded video contents/Playing play-only discs/Recording television programmes
DMREH58&68GN_RQT9075-L_eng.book 17 ページ 2008年2月29日 金曜日 午前11時40分