Filter
Top Products
24
RQT9075
Advanced timer recording
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [1] to move through the items
and change the items with [3, 4].
≥Press and hold [3, 4] to alter the Start (Start time) and
Stop (Finish time) in 30-minute increments.
≥You can also set Name (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
Titles recorded using the same daily or weekly timer are
bundled and displayed as a “group” in the Direct Navigator
screen (➡ 27) except when using Auto Renewal Recording.
≥You can also press [DRIVE SELECT] to select the recording
drive.
When the recording drive is “DVD” and there is not enough
remaining space, recording automatically switches to the
“HDD” (➡ 25, Relief Recording).
≥You can also press [REC MODE] to change the recording
mode.
≥[HDD] RENEW (Auto Renewal Recording) (➡ 25)
ON!)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press [OK].
(➡ 42, Entering text)
4 Press [OK].
The timer programme is stored and the timer icon is displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í DVD] to turn the unit off.
1 While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
2 Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press the “Red” button.
≥The timer icon “F” (➡ 25) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon “F” (➡ 25) remains in the timer
recording list.
≥Press the “Red” button again to activate timer recording
standby.
≥When a timer recording is set, DVDs that were recorded using a
different TV system cannot be played unless the TV system is
changed in the Setup menu (➡ 60) or the timer recording has
completed or has been cancelled.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (➡ 43).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
the “F” flashes on the unit’s display.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
≥If the actual broadcasting times of timer recordings overlap, the
recording that starts first always has priority, and the recording of
the later programme will start only after the first timer recording has
finished.
Manually programming timer
recordings
[.
l
l
l
a.
Date: Current date up to one month later minus
one day
;:
Daily timer: SUN-SAT>MON-SAT>MON-FRI
;:
Weekly timer: SUN>--->SAT
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
TUE 14.10.08. 12:53:00
Mode
StopStart
No.
Date
HDD
DVD
HDD
Name
Drive
space
SP
OK
20:00
19:00
ARD
15. 7. TUE
01
New Timer Programme
&
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
TUE 14.10.08. 12:54:00
Mode
StopStartName Date
HDD
DVD
22:3022:0015. 7. TUE HDD
1 ARD
Programme Name
SP
No.
Name
ARD
01
&
Timer icon
TUE 14.10.08 12:56:00
Mode
Stop
HDD
DVD
HDD
Drive
space
SP
OK
20:00
Programme
Check to make sure “OK”
is displayed (➡ 25).
To cancel recording when recording
has already begun
To release the unit from recording
standby
Notes on timer recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
OK
RETURN
SELECT
Programme
Programme
Recorded Recorded
Not recorded
DMREH58&68GN_RQT9075-L_eng.book 24 ページ ２００８年２月２９日 金曜日 午前１１時４０分