Filter
Top Products
Convenient functions
VQT4L30
80
Changing the unit’s settings (Setup)
Others
Standby Settings
Quick Start
•On:
It is possible to start quickly from standby
mode.
•Off:
Power consumption in standby mode is
minimized. (> 96)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
“Quick Start” is activated when the set time
comes. (If the clock has not been set, this
function is not activated at all hours.)
• When “Home Network function” (> 79) or “Remote
Recording function” (> 79) is set to “On”, the setting
for this function is fixed to “On”.
• If “Off” or “Timer Setting for Quick Start” is selected, the
setting for “Unit’s Display” is fixed to “Automatic”. (
>
75)
• [PWT635] The setting may be changed to “On”
automatically when the setting for video
communication is changed. (> 61)
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When “REWIND LIVE TV” is set to “On”
(> 73), “Off” cannot be selected.
Automatic Standby after OTR
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing “Automatic Stop” or
“Recording Time” (> 28).
Automatic Standby after Copy
•On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing copy (> 57).
RF OUT ( Aerial Signal )
Set whether to output the broadcasting signal
from RF OUT or not while in standby mode
(When “Quick Start” is not activated).
• If “On” is selected, the aerial signal is output
from this unit.
Power Save for Network Standby
You can minimize power consumption in
standby mode even when the “Quick Start”
function is activated. (> 96)
• When this is set to “On”, startup time when operating
[GUIDE] and [DIRECT NAVIGATOR] from standby
mode will be longer.
DMR-PWT635EB_eng.book 80 ページ ２０１３年３月２７日 水曜日 午後３時５２分