Filter
Top Products
VQT4J81
11
11
ENGLISH
The clock has not been set at the time of purchase.
The clock is used as a file name (➜ page 67) or to preserve recording date and time
information. Set the correct date and time. If the power is turned on when the clock is
not set, the screen shown in step
4
is displayed.
• Turn the power on. (➜ page 9)
1
Press [MENU].
2
Press +, – to select “COMMON
MENU” and press [q OK] to enter.
3
Press +, – to select “DATE & TIME”
and press [q OK] to enter.
4
Press +, – to set
the year and press
i.
The above illustration is a display example.
5
Press +, – to set the month and
press i.
6
Press +, – to set the date and press
i.
7
Press +, – to set the clock
indication method and press i.
“ 24h ” and “ AM / PM ” are displayed for the
24-hour display and the 12-hour display
respectively.
8
Press +, – to set the hour and press
i.
9
Press +, – to set the minute.
To change the setting, press u, i to
move between the items, and then press
+, – again to make the setting.
10
Press [q OK] to enter.
The date and time are set and the clock
starts to operate.
To exit the setting screen, press
[F2 (CLOSE)].
* The clock operates with the monthly loss/gain of approx. 60 seconds at normal temperature.
* The clock setting will be lost if the battery is removed or completely exhausted.
Setting the clock
F2
MENU