Filter
Top Products
VQT4J81
15
15
ENGLISH
• Turn the power on. (➜ page 9)
• Press [STOP g/RETURN] to stop the unit.
• Select the microphone position. (➜ page 14)
1
Press [F2 (FOLDER)].
2
Press u, i
to select the
recording
destination folder
and press [q OK]
to enter.
For microphone recording, select a folder
among folders “A”, “B”, “C” and “D”.
(The factory setting is “A”)
When you select a folder except for “A”, “B”,
“C” or “D”, recording is automatically saved
in “A”.
* Change the recording mode or microphone sensitivity as necessary. (➜ pages 25, 26)
* A function is available for simultaneously retrieving all the recording settings recommended for
the recording scene
. (➜ page 20)
* If the file size exceeds 2 GB during recording, the recording stops tentatively at the point when
the data reaches 2 GB
. Then, the recording resumes with a new file. Recording is not available
during the interval (approx. 2 seconds) from when the recording stops to when the recording
resumes.
* Note if your finger or an object touches this unit during recording, the noise will be
recor
ded through the microphone.
3
Press [REC *] (Recording starts).
The recording indicator
lights on.
4
Press [STOP g/RETURN] to stop
recording.
To pause recording:
1
Press [REC *] during recording.
Recording indicator blinks.
2
Press [REC *] again to resume recording.
Recording
F2
REC *
STOP g/RETURN