Filter
Top Products
VQT4J81
79
79
ENGLISH
Symptom Checkpoints
Recording
Sound skipping on the recorded
file.
•
You formatted the internal memory of this unit or the SD card using the
computer. If they are formatted using the computer, the optimum performance
of this unit may not be achieved. Format it on this unit. (➜ page 60)
• This unit may not operate correctly depending on the SD card manufacturer
or type of SD card.
• For details on cards that are confirmed to operate correctly according to our
manufacturing standards, see the support site below.
http://panasonic.net/support/
• VAS is functioning. (➜ page 31)
Noise is heard from the recorded
voice.
• If you brush this unit with your hand or an object touches this unit during
recording, noise will be recorded through the microphone. Avoid contact of
object during recording.
Recorded sound is distorted.
There is a noise at the beginning
of sound.
• Set the microphone sensitivity to “LOW” or keep the microphone distance
farther away from the recording source. (➜ page 26)
If the sound is still distorted, set the Low Cut filter setting to ON (➜ page 26),
set the recording level adjustment to Manual and adjust the recording level
before recording. (➜ page 27)
Recorded sounds contain noise
that make it difficult to hear
sounds.
•
Move a mobile telephone away from this unit when you use the two in the same area.
• Set the “LOW CUT FILTER” to “ON”. Noise is reduced and listening may
become easier. (➜ page 26)
• Perform test recording switching the recording mode (➜ page 25) or
microphone sensitivity (➜ page 26) and set the most appropr
iate recording
environment.
Recorded sound differs from the
actual sound.
• Is Recording EQ (➜ page 29) or “LOW CUT FILTER” (➜ page 26) set?