Filter
Top Products
VQT4J81
20
20
Selecting the recording scene
This unit offers recommended recording settings for each recording scene. Selecting
the recording scene enables easy recording with the most appropriate settings.
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU] for
approx. 1 second
or more.
The screen to select
the recording scene is
displayed.
2
Press +, – to select the scene and
press [q OK] to enter.
If you select “USER”, skip the step
3
.
3
Press +, – to select “LOAD” and
press [q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
The selected recording
scene is displayed.
When [REC *] is pressed, recording is
performed with the selected recording scene
setting.
* If you select “USER” in step
2
, the state immediately before the recording scene was set is
restored, and the recording scene indication disappears.
* If you individually change settings such as the recording mode when the recording scene is set,
the settings o
verwrite the “USER” settings, and the recording scene indication disappears.
* The recording scene operates when microphone recording is used. Recording scene does not
oper
ate when another device is connected and the Mic/Line switch is set to [LINE] (➜ page 35).
* You can also set the recording scene by pressing [MENU] and selecting “SCENE SELECT” from
“MIC REC MENU”.
F2
REC *
STOP g/RETURN
MENU