Filter
Top Products
VQT4J81
55
55
ENGLISH
Using the timer
Audio can be recorded at the set date and time. The timer can also be used as an
alarm by playing back files or sounds. Set the clock correctly beforehand. (➜ page 11)
• Press [STOP g/RETURN] to stop the unit.
1
Press [MENU].
2
Press +, – to select “COMMON
MENU” and press [q OK] to enter.
3
Press +, – to select “TIMER &
ALARM” and press [q OK] to enter.
4
Set items such as
the date and time,
and sound source.
For details on the
items, see page 56.
1
Press +, – to select the item and press
[q OK] to enter.
2
Press +, –, u, i to select the setting
and press [q OK] to enter.
Repeat steps
1
and
2
to complete the
settings.
5
Press +, – to select “OK” and press
[q OK] to enter.
To exit the setting screen, press
[F2 (CLOSE)].
* Be sure to perform the “OK” operation in
step
5
. If this operation is not performed,
the timer will not operate correctly. If a button
such as [F2 (CLOSE)] is pressed while
setting the timer, “REGISTER SETTING?”
may be displayed. Select “YES” or “NO” and
press [q OK] to enter.
* The sound volume at the timer playback is
the same v
olume as when the timer was set.
Set the appropriate sound volume before
setting the timer.
STOP g/RETURN
F2
MENU
ERASE/A-B&