Filter
Top Products
32
RQTV0238
LANG - 5 LANG - 4 FRANÇAIS DANSK
Troubleshooting guide (continued)
A-B repeat Page
Point B is automatically set.
• The end of an item becomes point B when it is reached. 16
Marker
Cannot add markers.
• You cannot add markers with DVD-VR.
• If the disc’s elapsed play time doesn’t appear on the unit’s display, you cannot
add markers.
17
—
Sound
Sound distorted.
• Noise may occur when playing WMA. —
Effects do not work.
• Some audio effects do not work or have less effect with some discs.
• Advanced Surround does not work if you have changed the play speed.
—
25
Humming heard during play.
• An AC power supply cord or fl uorescent light is near the cables. Keep other
appliances and cords away from this unit’s cables.
—
No sound.
• There may be a pause in sound when you change the play speed.
• Audio may not be output due to how fi les are created.
16
7
Menus
The SETUP menu cannot be
accessed.
• Select “DVD/CD” as the source.
• Cancel program and random play.
—
13
Picture abnormal or un-viewable
Picture distorted.
• Some distortion is normal during SEARCH.
• Ensure that the unit is connected directly to the television, and is not connected
through a video cassette recorder.
• Change “Source Select” in Picture Menu.
11
4
17
Picture size doesn’t fi t the
screen.
• Change “TV Aspect” in the “Video” tab.
• Change the Zoom setting.
19
17
The television may display
incorrectly or colors appear
faded.
• The unit and television are using different video systems.
–
For Australia and N.Z.
Use a multi-system or PAL television.
–
For Southeast Asia
Use a multi-system or NTSC television.
• The system used on the disc does not match your television.
– PAL discs cannot be correctly viewed on an NTSC television.
– This unit can convert NTSC signals to PAL 60 for viewing on a PAL television
(“NTSC Disc Output” in “Video” tab).
—
—
19
Menu is not displayed
correctly.
• Restore the zoom ratio to “x1.00”. (“Manual Zoom” in Display Menu)
• Set “Subtitle Position” in Display Menu to “0”.
18
17
Auto zoom function does
not work well.
• Turn off television zoom function.
• Use the other preset aspect ratios or manual adjustment.
• Zoom function may not work well, especially in dark scenes and may not work
depending on the type of disc.
—
17
—
Progressive video
There is ghosting when
progressive output is on.
• This problem is caused by the editing method or material used on DVD-Video,
but should be corrected if you use interlace output. Change “Video Output
Mode” in Picture Menu to “480i” or “576i”.
17
Picture not in progressive
output.
• Select “480p” or “576p” in “Video Output Mode” in Picture Menu.
• If the unit is connected to the television through VIDEO OUT terminal, output will
be interlace, even if “PRG” is displayed.
17
4
Listening to the radio
Noise is heard.
“ST” fl ickers or doesn’t
light.
Sound is distorted.
• Adjust the position of the FM or AM antenna.
• Use an outdoor antenna.
• Press [-PLAY MODE] to select “MONO”.
5
5
22
A beat sound is heard.
• Turn the television off or separate it from the unit. —
A low hum is heard during
AM broadcasts.
• Separate the antenna from other cables and cords. —
SC-VK660_EN(GCS).indd 32SC-VK660_EN(GCS).indd 32 5/4/07 12:01:01 AM5/4/07 12:01:01 AM