Filter
Top Products
4
RQTV0238
LANG - 5 LANG - 4 FRANÇAIS DANSK
To household AC power socket
Set the voltage
Set the voltage
For Southeast Asia
Before connecting the AC power supply cord,
set the voltage.
Voltage Selector
Use a fl at-head screwdriver
to set the voltage selector
on the back of the main unit
to the appropriate position
for the area in which this
system is used.
Power supply connection
Power supply connection
The included AC power supply cord is for use with this
unit only. Do not use it with other equipment.
Video connections
Video connections
• Do not connect the unit through a video cassette recorder
Due to copy guard protection, the picture may not be displayed correctly.
• Turn the television off before connecting, and refer to the television’s operating instructions.
■ Television with COMPONENT VIDEO IN terminals
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
COMPONENT
VIDEO IN
PR
PB
Y
Television
(not included)
Video cables
(not included)
Rear panel
of this unit
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive output.
Connection using these terminals outputs the color difference signals (PB/PR) and luminance
signal (Y) separately in order to achieve high fi delity in reproducing colors.
The description of the component video input terminals depends on the television or monitor
(example: Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR). Connect to terminals of the same color.
To enjoy progressive video
1. Connect to the component video input terminals on a 480p or 576p compatible television.
(Video will not be displayed correctly if connected to an incompatible television.)
2. Select “480p” or “576p” for “Video Output Mode” (Picture Menu, page 17).
■ Television with a VIDEO IN terminal
COMPONENT
VIDEO OUT
VIDEO
OUT
P
B
P
R
Y
VIDEO IN
Television
(not included)
Video cable
(included)
Rear panel
of this unit
Simple setup
Making the connections
Making the connections
Connect the AC power supply cord only after all other connections have been made.
Conserving power
The unit consumes power (approx. 0.9 W) even when it is turned off with [ ] (main unit: [ /I]). To save power when the unit
is not to be used for a long time, unplug it from the household AC power socket. You will need to reset some memory items
after plugging in the unit.
SC-VK660_EN(GCS).indd 4SC-VK660_EN(GCS).indd 4 5/3/07 11:55:53 PM5/3/07 11:55:53 PM