Filter
Top Products
25
■ Operation of Combination Camera
It is necessary to setup the combination camera before
operating it. For further setup information, refer to the
Operating Instructions for the combination camera (See
page 30). You can also set it up from the Camera Setup
menu if you operate a system.
● Changing to Picture at Preset Position
The following function is available only with cameras pro-
vided with the preset function.
The preset function makes the combination camera move
to the programmed preset position.
It is necessary to program preset positions for the combina-
tion camera beforehand.
Select a preset number using the numeric buttons, and
press the PRESET/SET/PROGRAM PRESET button.
● Auto Pan
The following functions are available only with cameras pro-
vided with the pan/tilt head specified for this operation.
It is necessary to program auto pan function for the combi-
nation camera beforehand.
1. Press the AUTO/B/W/PATROL STOP button.
The auto panning function programmed for the combi-
nation camera is activated.
The picture appears on the monitor.
The following functions differ depending on the combi-
nation camera.
AUTO PAN ON or functions set in the combination
camera:
Press Numeric button 1 followed by this but-
ton.
AUTO SORT ON: Press Numeric button 2 followed by
this button.
AUTO SEQ ON: Press Numeric button 3 followed by
this button.
RANDOM PAN ON: Press Numeric button 4 followed
by this button.
For further information, refer to the Operating Instruc-
tions for the combination camera.
2. To stop auto pan, move the joystick.
PROGRAM
PRESET
SET
PRESET
The combination camera moves to the programmed preset
position, and the picture of the camera in that position
appears on the monitor.
● Changing to Picture at Home Position
The following function is available only with cameras pro-
vided with the preset function.
It is necessary to program the home position for the combi-
nation camera beforehand.
Press the HOME/ESC button to move the combination cam-
era to the home position.
ESC
HOME
The camera returns to the home position and the picture at
that position appears on the monitor.
B/W
AUTO
PATROL STOP
UP
LR
DOWN
1 2 3
4 6
7 8 9
0
5
PROGRAM
PRESET
ESC
HOME
SET
PRESET