Filter
Top Products
6
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
■ Front View
q Operate Indicator (OPERATE)
Lights up while the power of the System Controller is
turned on.
w Alarm Indicator (ALARM)
Blinks when an alarm is activated.
The blink changes to steady light when the alarm is
automatically reset.
To turn the indicator off, press the ALARM RESET but-
ton.
e Joystick Controller (UP/DOWN/L/R)
This joystick is used to manually operate the Pan/Tilt
Head, or move the cursor in the Setup menu on the
monitor screen.
Keeping the Joystick Controller pushed down in the
desired position will keep the cursor moving continu-
ously in the Setup menu. (See page 17.)
UP: Upward
DOWN: Downward
L: Left
R: Right
r Patrol Play/Patrol Learn Button (PATROL PLAY/
PATROL LEARN)
Pressing this button will turn on the camera patrol play
function. Pressing this button while holding down the
CAMERA SETUP/SETUP/PROGRAM button will start to
program the camera patrol learning function.
t Defroster/Auxiliary 2 Button (DEF/AUX2)
Pressing this button will activate the housing defroster
of cameras provided with this feature. Pressing it after
pressing the SHIFT button will turn on the AUX2 button
controlling accessories connected to the camera or the
specified receiver.
The LEDs next to the button are each lit while the
defroster or AUX2 mode is selected.
System Controller WV-CU
1 2 3
4 6
7 8 9
0
5
SHIFT
OPERATE ALARM
RESET
SLOW
SUSPEND
CAMERA
SETUP
PATROL
PLAY
PROGRAM
PRESET
CAMERA
FUNCTION
SETUP
ESC
HOME
SET
PRESET
WIDE TELE
NEAR
AUX1
B/W
AUTO
PATROL STOP PATROL LEARN
WIPER
AUX2
DEF
UP
DOWN
RL
FAR
FOCUS
IRIS
ZOOM
CLOSE OPEN
PROGRAM
ALARM
IRIS RESET
AUTO FOCUS
q w ry
t
e
u
i!0 !1 o!2
!3
!4
!5
!6