Filter
Top Products
26
● Changing from Color to Black and White
Picture
The following function is available with cameras provided
with the color-black and white switching function specified
for this operation.
1. Press the AUTO/B/W/PATROL STOP button, after
pressing the SHIFT button, to change from color to
black and white picture. The black and white picture
appears on the monitor.
● Camera Patrol Function
The following function is available with combination cam-
eras provided with the camera patrol function.
The camera patrol function enables the combination cam-
era to learn joystick movements and zooming operation.
To program the camera patrol learning function, see page
31.
1. Press the PATROL PLAY/PATROL LEARN button to
move the combination camera according to the data
saved in the memory.
The camera patrol picture appears on the monitor.
2. To stop the patrol play function, move the joystick.
PATROL
PLAY
PATROL LEARN
● Camera Functions
The following functions are available with the combination
camera. Those camera functions can be called up by num-
bers.
For further information, refer to the Operating Instructions
for the camera. Examples of camera functions are
described as below.
• Super Dynamic
2
The following function is available only with cameras
provided with the Super Dynamic 2 function.
1. Press numeric buttons 8 and 4.
UP
LR
DOWN
B/W
AUTO
PATROL STOP
SHIFT
2. To change back from black and white to color picture,
press the AUTO/B/W/PATROL STOP button after pres-
sing the SHIFT button.
B/W
AUTO
PATROL STOP
SHIFT
1 2 3
4 6
7 8 9
0
5
PROGRAM
PRESET
ESC
HOME
SET
PRESET
2. Press the SLOW/CAMERA FUNCTION button after
pressing the SHIFT button.
SHIFT
SLOW
CAMERA
FUNCTION
3. To cancel the Super Dynamic 2 function, press numer-
ic buttons 8 and 5.
• Electronic Shutter
The following function is available only with cameras
provided with the electronic shutter feature.
1. Press numeric buttons 1, 7 and 1.
1 2 3
4 6
7 8 9
0
5
PROGRAM
PRESET
ESC
HOME
SET
PRESET
Notes:
• This function is disabled if the change to black and
white picture function is set to AUTO in the Camera
Setup menu. In case of using this function, change the
parameter in the Camera Setup menu.
• It is invalid unless this operation of the color-black and
white switching function is completed in the camera
side.