30
CAMERA SETUP
You can use the WV-CU161 to setup the camera from the
Camera Setup menu.
For further information, refer to the Operating Instructions
for the individual combination cameras.
● Camera Setup
1. Press the CAMERA SETUP/SETUP/PROGRAM button
for 2 seconds or more to access the Camera Setup
menu. The CAMERA SETUP indicator lights up.
5. Press the CAMERA SETUP/SETUP/PROGRAM button
for 2 seconds or more to complete the Camera Setup.
2. Select an item and parameter by pressing numeric but-
tons 2, 4, 6 and 8.
3. Press the PRESET/SET/PROGRAM PRESET button to
execute the parameter or enter a submenu.
Notes:
• To display the special menu, move the cursor to [SPE-
CIAL] on the Setup menu, and press numeric buttons 4
and 6 simultaneously for 2 seconds or more.
• To restore all defaults, move the cursor to [CAMERA
RESET]* on the Setup menu, and press buttons 4, 5
and 6 simultaneously for 2 seconds or more.
* The menu to restore the camera defaults differs
depending on the camera:
[SPECIAL] for the WV-CS654, [SPECIAL 2] for the WV-
CS854, and [END] for fixed cameras, etc.
Caution: If camera setup is started using the buttons
on the camera, all future operations for setup must
be performed with buttons.
If camera setup is started using the System
Controller, all future operations for setup must be
performed using the same controller.
Note: For further information, refer to the Operating
Instructions for the selected camera.
● Keys Used in Camera Setup Menu
CAMERA SETUP/SETUP/PROGRAM button:
To display a program menu by pressing CAMERA
SETUP/SETUP/PROGRAM button 2 seconds or more.
