Filter
Top Products
18
Standby (ON / OFF) button
The Display must ¿ rst be plugged into
the wall outlet and turned on at the power
switch (see page 14).
Press this button to turn the Display On,
from Standby mode. Press it again to turn
the Display Off to Standby mode.
ACTION button
Press to make selections.
ASPECT button
Press to adjust the aspect.
(see page 19)
POS. /SIZE button
(see page 22, 23)
PICTURE button
(see page 24, 25)
Sound mute On / Off
Press this button to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when power is
turned off or volume level is changed.
N button
(see page 23, 24, 25, 26)
POSITION buttons
INPUT button
Press to select input signal sequentially.
(see page 16)
ECO MODE (ECO)
Press to change the ECO MODE
setup status. (see page 32)
FUNCTION buttons (FUNCTION)
(see page 45)
Digital Zoom (see page 20)
Remote Control Transmitter
AUTO SETUP button
Automatically adjusts the position/
size of the screen. (see page 22)
SET UP button (see page 27 - 42)
SOUND button (see page 26)
Volume Adjustment
Press the Volume Up “+” or Down
“–” button to increase or decrease
the sound volume level.
R button (see page 21)
Press the R button to return to
previous menu screen.
OFF TIMER button
The Display can be preset to switch to stand-by
after a ¿ xed period. The setting changes to 30
minutes, 60 minutes, 90 minutes and 0 minutes (off
timer cancelled) each time the button is pressed.
30 min 60 min
0 min
90 min
When three minutes remain, “Off timer 3 min” will
À ash.
The off timer is cancelled if a power interruption
occurs.
RECALL button
Press the “RECALL” button to
display the current system status.
1
Input label
2
Aspect mode (see page 19)
3
Off timer
The off timer indicator is
displayed only when the off
timer has been set.
4
Clock display (see page 44)
Basic Controls
Off timer
90min
1
2
3
4
10:00
PC
4:3