Filter
Top Products
Options
1/3
On screen display
Input Search
On
Initial input
Off
Off
Off
0
0
Maximum VOL level
Initial VOL level
Off
Input lock
Off
Button lock
Off
Remocon User level
On
5V Charge
Options
Enable
Off-timer function
Normal
Initial Power Mode
0
ID select
Off
Remote ID
Off
Serial ID
Off
Studio W/B
Protocol 1
LAN Control Protocol
RS-232C/LAN Information Timing
2/3
3/3
Options
Off
Clock Display
Off
Power ON Screen Delay
Function button assign 1
Power On Message (No activity power off)
On
Signal
Function button assign 2
Screensaver
Power Switch Lock
Off
4343
Item Adjustments
Input Search
Set auto input switching for when there is no signal. (see page 45)
On screen display
On: Displays all the following on screen.
• Power on display
• Input signal switch display
• No signal display
• Mute and the remaining time of off-timer after
was pressed.
Off: Hides all the items above from view.
Initial input
Adjusts the input signal when the unit is turned on.
Off
PC DVI HDMI1 HDMI2
Notes:
• Only the adjusted signal is displayed. (see page 16)
• This menu is available only when “Input lock” is “Off”.
Initial VOL level
Press
button to adjust the volume when the unit is turned on.
Off
On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
•
When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum
range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL level
Press
button to adjust the maximum volume.
Off
On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
becomes the same as the “Maximum VOL level”.
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
Input lock
Locks the input switch operation.
Off
PC DVI HDMI1 HDMI2
Notes:
• Only the adjusted signal is displayed (see page 16).
• Input switch can be used when this is set to “Off”.
1
2
4
Press to display the SET UP menu.
3
5
Press to select “OSD Language”.
Press for more than 3 seconds.
Press to select “Options”.
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
Options
Display Serial Number
Shipping
Options Adjustments
• The serial number of this device is displayed when “Display Serial Number” is selected in step 3.