Filter
Top Products
4141
Con¿ gure the various settings required to use the network function.
Control I/F Select
Set whether to control with RS-232C or LAN. When “LAN” is set, power indicator lights orange under the
condition of power off with remote control (stand-by state).
Note:
When the power indicator lights up orange, 6 W of power is being consumed.
Display Name
The name of the Display that is shown on the network can be changed.
LAN Setup
See page 42
AMX D.D.
This function allows the Display to be detected by AMX Device Discovery. For more details, visit the following
website.
http://www.amx.com/
Crestron Connected™
When this function is set to on, the Display can be monitored or controlled via the network using equipment and
application software of Crestron Electronics, Inc.
This Display supports the following application software from Crestron Electronics, Inc.
Ɣ
RoomView
®
Express
Ɣ
Fusion RV
®
Ɣ
RoomView
®
Server Edition
[Crestron Connected™] is a function to connect to a system developed by Crestron Electronics, Inc. which
manages and controls multiple system devices connected to the network.
• For details of “Crestron Connected™”, refer to the Crestron Electronics, Inc. website (Provided only in English).
http://www.crestron.com/
For the download of “RoomView
®
Express”, refer to the Crestron Electronics, Inc. website (Provided only in
English).
http://www.crestron.com/getroomview
Network Setup
LAN Setup
Control I/F Select
RS-232C
Display name
LFE7-00
1/2
Network Setup
AMX D.D.
Off
Off
Crestron Connected™
2/2
Press
2/2Setup
MULTI DISPLAY Setup
Set up TIMER
PRESENT TIME Setup
Network Setup
Menu Display Duration
15 S
Menu Transparency
20
Network Setup